Adjustable Bracket And Coupler Recommendation For 7000 Lb Trailer

Question

Question:

Hi, I have a Fulton coupler that I cannot find parts for. The locking mechanism is broken and is secured by 4 bolts 1inch from top to bottom bolt on center and 2.25inch from front to back on center. I have no problem replacing the entire assembly but wanted to make sure that there were not parts available. I have attached a couple of pictures. Almost forgot to add that I am not against a weld on adjustable coupler. The trailer can haul 7k lbs. Thanks :

asked by: Paul P

1

Helpful Expert Reply:

We do carry some replacement parts for couplers, however we do not carry replacement parts that would work for the coupler you have provided pictures of. We do have some options for you to consider.

For an adjustable channel coupler, I recommend the Bulldog Cast Head Coupler, part # BDA256C0317. This coupler has fits a 2-5/16 inch ball. The channel I would recommend for this coupler is the Bulldog 5-Position Adjustable Channel Bracket for Cast Head Couplers, part # BDAC5000300. This channel allows 8 inches of vertical adjustment and has a 24000 lb weight capacity.

For an adjustable bracket and coupler that uses a 2 inch ball, I recommend the Bulldog Cast Head Coupler, part # BDA2005C0317. This coupler has a 5-position bracket and has an 8 inch adjustable height, with a weight capacity of 8000 lbs.

Since the photo you sent shows the trailer tongue measures 2-1/2 inches by 2-1/2 inches, the couplers we offer have a reduced weight capacity. One coupler like this I recommend is the Husky Channel Tongue Trailer Coupler, part # HT87074. This is made of corrosion resistant zinc-plated steel, fits a 2 inch ball, and has a weight capacity of 3500 lbs. It is a bolt-on or a weld-on installation. I have attached a photo with some of the dimensions shown for this coupler.

Please be sure to have the installation welded by a experienced welding shop.

I have attached a link to a helpful article about trailer couplers.

expert reply by: Jeffrey L

1

click to enlarge

Answer 1

I am certainly glad you are taking safety into consideration when trying to choose your coupler, although none of the Demco couplers would be considered "safer" than the others you mentioned. Among the Demco Channel Tongue Trailer Coupler -…

view full answer...

Answer 2

The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…

view full answer...

Answer 3

Yes, the Sleeve-Lock Trailer Coupler #CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring w/ 3-Position Adjustable Channel Bracket #BR43ZR. The bolt holes match as well when it comes to size and spacing so you'll be good…

view full answer...

Answer 4

I would use a protractor, see photo, place the protractor on the edge of the inside of one side of the trailer frame and the other inside edge of the trailer frame should be parallel with the 50 degree line on the protractor. Another way to verify…

view full answer...

Answer 5

The Reese Strait-Line system should be chosen according to your loaded tongue weight. Ideally you want your actual tongue weight to fall in the middle of the tongue weight range of the weight distribution hitch. Since your dry tongue weight is 1,180…

view full answer...

Answer 6

The oblong holes are a no go, the spring bars will eventually fall out of the socket and the system would be completely ineffective as well as a danger to those around you. Also, if you are loading your trailer to the max then the system you have now…

view full answer...

Answer 7

F78-14 is an old size designation and equates to a 205/75-14 tire size so you will want to look at tires in this size. I have included a link to them for you. Since you will be towing approximately 5,000 pounds gross trailer weight and have 4 tires…

view full answer...

Answer 8

The biggest difference between the servo styles that you'll notice is between free backing plates and the others. The free-backing plates will allow your trailer to back up without having the brakes lock up. With surge brakes typically when you…

view full answer...

Answer 9

Unitized oil seals such as #10-63 for example are different than regular grease seals. Unitized seals have an inner part that stays fixed to the spindle on the axle and its outer case rotates with the trailer hub. You would remove and reinstall a new…

view full answer...

Answer 10

A double lip seal is an upgrade over the single lip that uses a reinforcing spring behind the lip that does a better job of retaining the grease inside the hub and excluding water and road grime. It is perfectly acceptable to use a double lip seal…

view full answer...

Answer 11

Optronics does not have a weight rating for their Magnetic LED Tow Light Kit #TLL21RK, however, this magnet is very strong and has been road tested at high speeds in varying weather conditions. This product is also made from durable polycarbonate,…

view full answer...

Adjustable Bracket And Coupler Recommendation For 7000 Lb Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching