Replacement U-Bolt Kit For Blue Ox SwayPro Weight Distribution

Question

Question:

We need that u shaped gizmo that has two bolts on it that connects with chains on our sway bars. Looks like the sway pro...

asked by: Donna H

0

Expert Reply:

The correct replacement U-bolt kit for the Blue Ox SwayPro weight distribution system is the following:

- Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars # BLU48FR

expert reply by: Kyle S

0

Answer 1

The hardware and U-bolts are grade 5 for the Blue Ox kit: - Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars #BLU48FR

view full answer...

Answer 2

For your Blue Ox SwayPro Weight Distribution w/ Sway Control #BXW1500, you can use the: -Replacement U-Bolt Kit for Blue Ox Weight Distribution Spring Bars #BLU48FR. As far as the TorkLift GlowStep Revolution Scissor Steps w/ Landing Gear #TLA8102…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 6

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 7

It really just depends on what the wires are for. Most likely you have several ground wires among the 8 as well as a couple running light circuits in there as well. You just have to run all of the wires to the correct circuits. The 4-way wiring of…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Replacement U-Bolt Kit For Blue Ox SwayPro Weight Distribution

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching