Will Pop & Lock Custom Tailgate Lock Fit 1999 Chevy Silverado Regular Cab With Short Bed

Question

Question:

will it fit a 99 silverado regular cab 6.5 ft bed

asked by: Mike R

0

Expert Reply:

Yes, the Pop & Lock Custom Tailgate Lock # PAL1100 will fit your 1999 Silverado with the regular cab and 6-1/2' bed. This integrates into your OEM handle for a factory look and will allow you to secure your tailgate.

expert reply by: Robin H

0

Answer 1

According to my research, AL-KO 8490 references an AL-KO hub for 3,500 lb axles with a 10 x 2-1/4" drum and a 5 on 4-1/2" bolt pattern. For a drum assembly that will work with these hubs I recommend taking a look at the Electric…

view full answer...

Answer 2

Dexter part 10-41 is a grease seal for a mobile home utility hub. It has a specified inside diameter of 1.938-inches and an outside diameter of 2.523-inches. The nearest match we offer is the Redline part #10-40 which is a single-lip seal that has…

view full answer...

Answer 3

The Dexter brake assembly 023-217-00 is a 10 by 2-1/4 brake for 3,500 pound axles that fits a 4-bolt brake mounting flange. For replacements I recommend part #AKEBRK-35-SA that includes both sides. They're labeld to make the install easier…

view full answer...

Answer 4

The grease cap part number that you referenced cross references to a drive in cap with a 2.44 inch outside diameter. If you have a standard cap then the Grease Cap, 2.44 inch OD Drive In, item #RG04-060, is the correct part. If you have a grease…

view full answer...

Answer 5

There are 4 wires coming out of the back of the Draw-Tite Activator IV Brake Controller part 5504. You are correct in that the black wire runs to the positive side of the vehicle battery through a circuit breaker. The white wire runs to the…

view full answer...

Answer 6

Not confusing at all. I took a look online and the 2001 Silverado 2500HD has a 12,000 lbs bumper pull towing capacity and a 15,200 lbs 5th wheel towing capacity. It's just two different capabilities of the truck. The extra weight of a 5th wheel…

view full answer...

Answer 7

The dimensions you have are nearly identical to the CE Smith #CE19504-2 you looked at. However, these are designed for 14" wheels. For 15" wheels you would need the Fulton #F008585-2. These are slightly longer and taller at 10-1/4"…

view full answer...

Answer 8

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

view full answer...

Will Pop & Lock Custom Tailgate Lock Fit 1999 Chevy Silverado Regular Cab With Short Bed

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching