Where is the Bulldog Winch Big Dog Hook Made

Question

Question:

where is it made?

asked by: Thaddeus B

0

Expert Reply:

The Bulldog Winch Big Dog Hook part # BDW20182 is made overseas but it does have a lifetime warranty so if there were every any issues with the tow hook, you'd be covered. It's not the same style but if you're looking for something made in the USA I recommend the BulletProof Hitches Shackle Hitch part # ED20SHACKLE.

expert reply by: Conner L

0

Answer 1

You will need two separate types of locking pins to secure both the shackle to the mount and the BulletProof Hitches Shackle Hitch for 2" Receivers item #ED20SHACKLE to your truck. I recommend the InfiniteRule Locking Pin for Swivel Hooks or…

view full answer...

Answer 2

Both of the hitch pin holes on the Bulletproof Hitch #ED20SHACKLE are 5/8". This is basically universal for all of the tow shackles we carry. We do not carry a tow shackle that will accept a 3/4" hitch pin.

view full answer...

Answer 3

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 4

That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 8

For the shackle mount of the Bulldog Winch Big Dog 1-1/2 Inch Shackle #BDW20181, you will want part #BDW20181C001. This hitch mount shackle mount will fit 2 inch trailer hitches. The shackle mount requires at least 2 inches between the ends of the…

view full answer...

Answer 9

I spoke with my contact at Tow Ready about the Tow Ready Combo Bar, part #80948. This is a 48 inch long bar that is used to fabricate 2 inch trailer hitch receivers. They told me this bar is used when they manufacture hitches with capacities up to…

view full answer...

Answer 10

We have couplers that match most of what you are looking for like with the etrailer coupler part #CT-3002-Z as this fits a 2-1/2 inch wide trailer tongue, fits a 2 inch ball, but the mounting holes are 3 inches apart instead of 4. We don't have…

view full answer...

Answer 11

I went to the warehouse and measured, the wall thickness of the Buyers Products Black Receiver Tube part #337RT25848B is 0.27". This has a maximum gross trailer weight of 20,000 lbs so you will not have any issues using it for your farm…

view full answer...

Answer 12

I do recommend checking the owner's manual for said vehicle to ensure it can tow but so long as this is allowed we do offer a trailer hitch option for the 2022 BMW X2 m35i, the Curt Trailer Hitch Receiver part #C11530 which offers a custom…

view full answer...

Where is the Bulldog Winch Big Dog Hook Made

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching