What Size Are The Hitch Pin Holes On The Bulletproof Shackle Hitch ED20SHACKLE

Question

Question:

What is the diameter of the pin holes drilled through the 2inch ? Looking for something that can accommodate a 3/4inch diameter hitch pin.

asked by: Brandon K

0

Expert Reply:

Both of the hitch pin holes on the Bulletproof Hitch # ED20SHACKLE are 5/8". This is basically universal for all of the tow shackles we carry. We do not carry a tow shackle that will accept a 3/4" hitch pin.

expert reply by: Jesse M

0

Answer 1

The Bulldog Winch Big Dog Hook part #BDW20182 is made overseas but it does have a lifetime warranty so if there were every any issues with the tow hook, you'd be covered. It's not the same style but if you're looking for something made in…

view full answer...

Answer 2

E-tracks are typically the stronger of the two, but X-track is more versatile since you can mount them horizontally or vertically. Choosing between the two really depends upon how you plan to use them. If you are installing something in a truck bed,…

view full answer...

Answer 3

That's a fine question. Unlike many things in this world the companies like Kinedyne, Erickson and Cargo Smart all made the tracks the same size! So luckily for us we can use any of the e-track or x-track accessories like the Erickson E-Chock…

view full answer...

Answer 4

From the center of the hitch pin hole to the center of the shackle bolt hole on the Curt Tow Strap Loop for 2" Hitches #C45832 is going to be about 4-1/2" (see attached photo).

view full answer...

Answer 5

The Curt Tow Strap Loop #C45832 that you referenced is a great hitch mounted tow strap loop. It's a clevis loop that can pivot up and down and has the same weight capacity as any hitch it's installed in. We don't carry any weld on loops…

view full answer...

Answer 6

For the 2020 Ram 2500 4WD I recommend the Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle part #F2598 because they install without drilling with a 5th wheel hitch in the bed compared to other brands that require drilling…

view full answer...

Answer 7

The capacity of the Curt Forged Tow Hook #C45500 is basically going to be whatever the hitch it is installed in is. What that means is that if you were in a recovery situation where you were putting an extreme amount of strain on this hook the hitch…

view full answer...

Answer 8

You will need two separate types of locking pins to secure both the shackle to the mount and the BulletProof Hitches Shackle Hitch for 2" Receivers item #ED20SHACKLE to your truck. I recommend the InfiniteRule Locking Pin for Swivel Hooks or…

view full answer...

Answer 9

I reached out both to Curt and Draw-Tite about the installation of their front mount hitches, parts #C31086 and #65079 respectively, on your 2018 Jeep Wrangler Rubicon and I pretty much got the same answer from both of them. The plastic pieces are…

view full answer...

Answer 10

For the shackle mount of the Bulldog Winch Big Dog 1-1/2 Inch Shackle #BDW20181, you will want part #BDW20181C001. This hitch mount shackle mount will fit 2 inch trailer hitches. The shackle mount requires at least 2 inches between the ends of the…

view full answer...

What Size Are The Hitch Pin Holes On The Bulletproof Shackle Hitch ED20SHACKLE

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching