Dimensions of Ark XO350 and XO750 Mounting Plates

Question

Question:

Looking to upgrade the tongue jack on my InTech Explore. Can you provide the bolt hole mounting diagrams for both the Ark xo350 and xo750 models so I can see if either can be used?

asked by: Tim S

0

Expert Reply:

I have attached two diagrams below with the dimensions for the XO350 and XO750. Both of these use a bolt on installation so you really only need to know the height of your tongue to see if it is compatible.

The # ORJW350D fits 2" to 6" tall trailer tongues and has a 770 lb static load capacity. The # ORJW750D fits 3" to 6" tall trailer tongues and has a static load capacity of 1,650 lbs and dynamic capacity of 1,100 lbs.

expert reply by: Robin H

0

Ark XO350 Mounting Plate.
(click to enlarge)

Ark XO750 Mounting Plate
(click to enlarge)

Answer 1

I have a couple options for you to consider as no one makes a jack that will bolt on in place with your Shelby 4587 jack bracket you have welded to your frame. First the Round Swivel Marine Jack w/ Wheel #MJ-1200B is the closest we have to the design…

view full answer...

Answer 2

I can definitely understand your frustration as the Fulton F2 Swing-Up Trailer Jack with Dual 7" Wheels, Sidewind -1,600 lbs F1413100334 is not a cheap jack so it would be nice to replace the plastic housing part number 9 in the included diagram…

view full answer...

Answer 3

The correct Lock N Roll hitch assembly is going to depend on the size of the channel the coupler of your trailer sits on. You need about a 5" drop, and the closest is going to be the 4-1/2" drop Lock N Roll Articulating Hitch for 2"…

view full answer...

Answer 4

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

view full answer...

Answer 5

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

view full answer...

Answer 6

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels - Sidewind - 10" Lift - 1,650 lbs - Zinc #ORJW750D weighs 44-lbs.

view full answer...

Answer 7

I was able to have our warehouse measure the mounting plate for the Ark Extreme Off-Road Swing-Up Trailer Jack #ORJW350D you were looking at and included a diagram showing its dimensions. The Ark #ORJW350D mounting bracket measure 7-1/2" tall x…

view full answer...

Answer 8

A 3,000 lb jack would be able to lift a 5,000 lb trailer since the jack would basically only be lifting half of the trailer weight since the other half is supported by the wheel on the other side. I think bare minimum you'd need a 2,500 lb jack…

view full answer...

Answer 9

Per the manufacturer The Xtreme Off-Road Ratcheting Trailer Jack w/ Wheel - Sidewind #ORJW1SU has a clearance of roughly 61.55 mm or 2.4 inches. So it will work on your frame. The jack has a sturdy steel construction which is durable and built to…

view full answer...

Answer 10

When the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel #ORJW1SU is in the forward position the wheel can move only one direction and it can keep moving forward without the handle moving it. It wouldn't roll back if in forward but if you were…

view full answer...

Answer 11

When retracted the Xtreme Off-Road Ratcheting Trailer Jack item #ARK54FR is 29" long from the top of the jack to the bottom of the wheels. From the bottom of the wheel to the center pivot point where the bracket attaches is 14". When folded…

view full answer...