Is Air Bag of Reese Goose Box Reliable

Question

Question:

can you replace the air bag?

asked by: Darrryl L

0

Expert Reply:

It's very rare that the air bags or air system of the Reese Goose Boxes like part # RP85FR will fail but we do have an air service kit with part # RP86007 that would replace the components that fail. Replacement air bags are not available.

expert reply by: Jameson C

0

Answer 1

Thanks for the picture! I just spoke with my rep at Lippert. Your toy hauler has a 1716 pin box which means you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY43FR. This pin box has a 21,000 lbs capacity and a 3,500…

view full answer...

Answer 2

In order to determine which Reese Goose Box you can use to replace the MORryde pin box on your 2020 Arctic Fox 5th wheel, you'll need to check the sticker on your MORryde which has the original manufacturer's name and model number. If your…

view full answer...

Answer 3

I attached a picture that has all of the dimensions of the Reese Goose Box part #RP85FR that you asked about.

view full answer...

Answer 4

According to MORryde, the FD in the RPB72-FD indicates Lippert Rhino. Since the Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter #RP85FR is designed to replace the Rhino this will fit your Grand Design Solitude 346-FLS.

view full answer...

Answer 5

The Reese Goosebox works very well. It's air ride feature would spare the frame from the beating it would experience from other gooseneck adapters. Lippert is the largest manufacturer of 5th wheel frames, and they have endorsed the Goosebox, and…

view full answer...

Answer 6

The Goose Box Doesn't specifiy the height required from the ground to the ball. Instead it specifies the height from the coupler connection to the front bottom bolt where the pin box attaches. I've attached photos of these dimensions to…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 10

Gen-Y's calculation for pin weight is a safe guess, but isn't the most accurate so the only way you'll get the correct capacity Gen-Y 5th Wheel Pin Box is to fully load the trailer and go to a commercial scale to measure the pin weight.…

view full answer...

Answer 11

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 12

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Is Air Bag of Reese Goose Box Reliable

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching