Recommended Front Trailer Hitch for 2022 Ram 2500 Diesel

Question

Question:

I'm looking for a front hitch for my 2022 Ram 2500. Do you have one that will fit if it is a diesel?

asked by: Tim A

0

Expert Reply:

We do have a hitch for your 2022 Ram 2500 Diesel. I recommend the Curt Front Mount Trailer Hitch Receiver # C31089. This hitch features a bolt-on installation, although some trimming of the front air dam and fascia may be required. It comes with a gloss black powder coat finish and a limited lifetime warranty.

expert reply by: Robin H

0

Answer 1

To attach a SnowBear plow to a front hitch like the Curt #C31089 that fits your 2019 Ram 2500 what you need is the hitch adapter part #SB324-120. This will enable your current plow to attach to a hitch so you'd be set with it and the front…

view full answer...

Answer 2

Without knowing where the snow plow would mount I can't say for sure. More than likely the #EH37FR mounts in the same location or would interfere with a snow plow that bolts onto the frame. I would compare the installation instructions for…

view full answer...

Answer 3

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver #DT36MR will fit your 2022 Ram 3500. This has a bolt-on installation with a 9,000 lb line pull and 500 lb vertical load limit. The only exception is if you have a diesel model.

view full answer...

Answer 4

If you already have a front mount hitch then all you'll need is a snowplow which uses the hitch receiver for installation. The Detail K2 Elite Snowplow for 2" Hitches part #K2AVAL8826ELT for example is a great option with an…

view full answer...

Answer 5

I attached a picture that shows the install instructions for the Caster Kit for SnowBear Snowplows #SB324-126 that you referenced.

view full answer...

Answer 6

For a plow that is confirmed to fit the front hitch of your 2003 Chevy Silverado 2500HD I recommend the SnowBear Proshovel Snowplow #SB324-172. It measures 84 inches wide by 22 inches tall which means it will take a wide section of snow with each…

view full answer...

Answer 7

For your 2010 Toyota Tundra with a 2 inch front hitch we have great plow options like the Detail K2 part #K2AVAL8826ELT which can be raised and lowered from inside your cab with a remote setup but we do not have any options that allow you to…

view full answer...

Answer 8

Actually SnowBear does not list a max height range for their snow plows like the part #SB324-172 that you referenced. A 22 inch hitch height like what you have would not be a problem at all for this plow!

view full answer...

Answer 9

We don't offer the individual casters but the entire kit which includes the casters, the brackets and the necessary installation hardware are available as part #SB324-126

view full answer...

Answer 10

In the video you referenced Randy is using the SnowBear Proshovel Snowplow - 84" Wide x 22" Tall #SB324-172. At the 4:45 minute mark he shows you how to lower the skid legs so that you can unhook and slide the snow plow away from your truck…

view full answer...

Answer 11

The blade height of the SnowBear Plow #SB324-080 that you referenced is 19 inches. Most likely your headlights will sit higher than this, but if you measure from the ground up 19 inches then you would know where the top of the blade would sit and…

view full answer...

Answer 12

The SnowBear Personal Snowplow for 2" Hitches #SB324-080 that you referenced does come with a winch to allow it to raise and lower. There really isn't a good way to remove the winch to use it it in other applications.

view full answer...

Recommended Front Trailer Hitch for 2022 Ram 2500 Diesel

Continue Researching