Recommended Replacement for Continental Knurled Aluminum 4" Channel Step Pad

Question

Question:

I have a Continental boat trailer model A2044B-4400 and need part #544-1140 knurled aluminum 4 channel step pad.

asked by: Scott S

0

Expert Reply:

I do have some step options for your boat trailer but we don't carry any factory parts such as the Continental Knurled Aluminum 4" Channel Step Pad. Instead, I recommend taking a look at one of the following:

CE Smith Galvanized Steel Step part # CE26212G-15284GA
HitchMate Boat Trailer Step part # HE4036
CE Smith Steel Step for Trailer Fender part # CE19011 for left front/right rear or part # CE19012 for right front/left rear

The most universal of the above options is the HitchMate Boat Trailer Step so that's what I recommend. It has a nice large 5" wide x 9" long step area with adhesive tape for better grip.

expert reply by: Conner L

0

Answer 1

Yes, Fulton single axle fenders like the #F008585-2 can work great on your cargo trailer. These are ideal for fitting 15 inch wheel/tire sizes like it looks like you might have.

view full answer...

Answer 2

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 3

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

view full answer...

Answer 4

The crank handle for the Lippert Components Spare Tire Winch with Offset Cable item #LC159056, is Replacement Crank Extension for Lippert Spare Tire Winch Assemblies - 35-1/2" item #LC1315411. The Spare Tire Winch item #LC159056 has a 1/2-inch…

view full answer...

Answer 5

The Replacement Crank Extension for Lippert Components Spare Tire Winch Assemblies #LC1315411, which is a replacement for Lippert Components Spare Tire Winch with Offset Cable #LC159056, has an inside diameter of 0.50 inches and the hex has a 0.75…

view full answer...

Answer 6

I was able to find the OEM part number for the Chevy spare tire hoist but I was unable to find a weight capacity rating on it. The owner's manual for the 2015 Chevy Silverado 1500 and the original hoist can handle the weight of a full sized spare…

view full answer...

Answer 7

To raise and lower the Lippert Spare Tire Winch with Offset Cable #LC159056 what you need is the replacement manual crank handle part #LC119226.

view full answer...

Answer 8

It is possible to over-fill a hub that has a Bearing Buddy bearing protector such as #BB1781. The convenience of easy filling through the zerk fitting can often mean we can be tempted to keep adding more grease. ("If a little is good, then more…

view full answer...

Answer 9

The Lippert Components Spare Tire Winch with Offset Cable #LC159056 requires the handle #LC119226 to crank up and down.

view full answer...

Answer 10

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 11

In order to replace the bike lock cable on the Yakima HoldUp Bike Rack like part #Y02443 you will need to use the Replacement Cable Lock Assembly part #Y8890284. There would be no way to unlock the core you have now if the face was damaged but this…

view full answer...

Answer 12

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Recommended Replacement for Continental Knurled Aluminum 4" Channel Step Pad

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching