Can The Westin Replacement Mounting Brackets Be Used On Go Industries Nerf Bars?

Question

Question:

I have a 2006 z71 crew cab but the stock nerf bars are Go Industries not Westin. Will this fit? Thanks

asked by: Wayne M

0

Expert Reply:

The Replacement Mounting Brackets and Hardware # 23-195PK are only confirmed to fit the Westin E-Series Round Nerf Bars in Stainless Steel # 23-1950 or Black # 23-1955. The manufacturer does not test fit their mounting brackets with other manufacturers and as we do not carry the Go Industries nerf bars we do not have a way to compare the fitment of these different nerf bars. I can say Westin will not provide any warranty for their brackets if you attempt to use them with a different manufacturers parts.

expert reply by: Bud M

0

Answer 1

If the Westin bars you have originally did fit your 2006 Chevy Silverado the correct replacement install hardware would be the part #23-195PK. If the bars came off of a different truck though they would not be able to fit your truck by just…

view full answer...

Answer 2

If the 3 inch diameter nerf bars were Westin brand bars and they initially came off of a 2003 GMC Sierra Extended Cab then yes the install kit part #23-195PK would fit and work great.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 5

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

The Air Lift LoadLifter 7500 XL Air Helper Springs - Rear Axle #AL57595 you were looking at is confirmed to fit your 2018 Ram 3500 but does not include an on-board compressor. For a compatible compressor I recommend the Air Lift QuickShot Compressor…

view full answer...

Answer 9

Yes, the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part #AL88399 will fit your 2018 Ford F-350 with most above bed base rails. The reason for this is because the air springs install underneath the frame rails whereas the brackets for most…

view full answer...

Answer 10

Because trucks can be equipped in a multitude of ways, it's not always easy to pin down the actual towing capacity. However, there is one sure-fire way to find the max towing capacity of your vehicle. Look for the vehicle ID sticker in the door…

view full answer...

Can The Westin Replacement Mounting Brackets Be Used On Go Industries Nerf Bars?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching