Replacement Hardware for Westin Round Nerf Bars to Fit 2006 Chevy Silverado 1500 Crew Cab

Question

Question:

What brackets do I need for 2006 Chevy 1500 LS crew cab? I just want to make sure i get the right ones of my year and model.

asked by: Bramwell H

1

Helpful Expert Reply:

If the Westin bars you have originally did fit your 2006 Chevy Silverado the correct replacement install hardware would be the part # 23-195PK. If the bars came off of a different truck though they would not be able to fit your truck by just swapping the hardware.

expert reply by: Jameson C

1

Answer 1

We have the Westin Hardware kit part #23-299PK that you referenced. If that's what you need you're in luck!

view full answer...

Answer 2

The Replacement Mounting Brackets and Hardware #23-195PK are only confirmed to fit the Westin E-Series Round Nerf Bars in Stainless Steel #23-1950 or Black #23-1955. The manufacturer does not test fit their mounting brackets with other manufacturers…

view full answer...

Answer 3

If the 3 inch diameter nerf bars were Westin brand bars and they initially came off of a 2003 GMC Sierra Extended Cab then yes the install kit part #23-195PK would fit and work great.

view full answer...

Answer 4

You will want to first consult your vehicle owners manual but based on my research your truck has a standard towing capacity of 7,500 pounds and max towing capacity of 10,500 pounds. The max is usually either with the truck properly equipped or when…

view full answer...

Answer 5

The correct replacement hardware for the Westin Platinum Series Nerf Bars on your 2001 Chevy Silverado is part #25-168PK. They're designed to fit certain GM trucks from the early 2000's. I've attached the install details as well as an…

view full answer...

Answer 6

From the picture you provided, it looks like you have the Westin E-Series 3" Round Nerf Bars #23-1680 which is confirmed to fit your 2008 GMC Sierra 1500 extended cab. The correct replacement hardware kit is #23-168PK. If your running boards are…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Replacement Hardware for Westin Round Nerf Bars to Fit 2006 Chevy Silverado 1500 Crew Cab

Product Page this Question was Asked From

Continue Researching