Will etrailer Replacement Clevis End Kit Fit Demco Base Plate Kit

Question

Question:

will this clevis kit fit on a demco baseplate? Replacement Clevis End Kit for etrailer XHD Tow Bar Item # e54ZR

asked by: Dwight T

1

Helpful Expert Reply:

Yes, the Replacement Clevis End Kit # e54ZR is compatible with both the etrailer and the Demco Classic and Tabless base plates.

Attached is a review video for you to check out.

expert reply by: Jon G

1

Answer 1

I went out to the warehouse to measure both the Blue Ox adapter #BX8833 and the arms on the Curt tow bar #C19745. I am happy to report that the adapter and tow bar will work together! The tow bar arms where the adapters would attach are 1.97 inches…

view full answer...

Answer 2

The Demco Commander II Non-Binding Tow Bar - Victory Series - RV Mount - 2" Hitch - 6,000 lbs #DM9511012 typically comes with the connecting clevises to connect to the Demco Classic Base Plate Kit - Fixed Arms #DM9518072. However, if you need a…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 5

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 8

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 9

Whether or not you can flat tow with a Jeep bumper is really up to the manufacturers testing; some of the big names like MetalCloak or Poison Spyder have bumpers with D-ring attachments that can be used for flat towing connections. This is great…

view full answer...

Answer 10

On oil bath hubs the seals are different than standard grease seals. The correct replacement for what you have is #91030. Unitized oil seals like this have a part that stays fixed and a part that rotates with the hub for optimum leak protection. I…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Will etrailer Replacement Clevis End Kit Fit Demco Base Plate Kit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching