BOLT Locks Keyable To a 2023 Ford F-150 Center Cut Key

Question

Question:

What hitch lock will work with my 2023 Ford F-150?

asked by: Dalton

0

Expert Reply:

I recommend using the BOLT Trailer Hitch Receiver Lock # BLT99FR which you can code to the key for your 2023 Ford F-150. This will ensure you do not have other keys to carry just for your receiver lock.

We also have the BOLT Trailer Coupler Lock # BLT27FR, BOLT Covered Padlock # BLT59FR, BOLT Trailer Coupler Lock # BLT69FR and BOLT Coiled Cable Lock # BLT49FR.

expert reply by: Bud M

0

Answer 1

The lock core of the Replacement OEM Bolt Lock for Extang EnCore Hard Tonneau Cover #EX28620152-28 can only keyed once. So if it got keyed to something there isn't a way to change it. That's kind of a security feature so that it can…

view full answer...

Answer 2

If you do in fact have the Extang Solid Fold Hard Tonneau Cover #EX56430, which is no longer available, then the: -Replacement Hinge Seal for Extang Solid Fold 2.0 Tonneau Covers #EX32560669 will be the correct replacement hinge seal. Which makes…

view full answer...

Answer 3

For the Extang Encore tonneau cover on your 2019 Ford F-150, there is not a way to reprogram the lock, it can only be coded once. What you need is a replacement, the Replacement OEM Bolt Lock for Extang EnCore Hard Tonneau Cover #EX28620152-28. To…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 7

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Yes, the Curt Custom Fifth Wheel Installation Kit for Ford #C93WR will work just fine with the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040.

view full answer...

Answer 12

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

BOLT Locks Keyable To a 2023 Ford F-150 Center Cut Key

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching