Recommended Gooseneck Trailer Hitch For a 2022 Ram 3500 Cab and Chassis

Question

Question:

I was looking for the largest towing payload for a gooseneck hitch. I have a RAM 3500 cab and chassis truck.

asked by: Ricardo C

0

Expert Reply:

I recommend welding in the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1500 on your 2022 Ram 3500 Cab and Chassis. This hitch with the included 2-5/16" hitch ball is rated for 30,000lbs with 7,500lbs of tongue weight. The 3" Hitch Ball # BWGNXA2025 is rated for up to 40,000lbs. You will need to verify your exact towing capacities with your Ram dealer.

expert reply by: Bud M

0

Answer 1

The dimensions are below for the B&W Turnoverball Underbed Gooseneck Trailer Hitch #BWGNRK1500. Overall dimensions of the plate- 6” X 8” Bottom of the plate to the bottom of the socket Fin (brace) – 2-1/4" Bottom of the plate to the end of…

view full answer...

Answer 2

While there are a couple option for a gooseneck hitch that can work for your 2022 Ram 5500 cab and chassis, the Curt gooseneck is a custom fit for the pick-ups, and there isn't a way it can be made to fit the cab and chassis. Depending on your…

view full answer...

Answer 3

We offer the Reese 9485 as our own unique part number, #DT89MR, as well as the Curt #C60633 or the B&W #BWGNRK1320 which will all fit. If I personally had to choose between the two, I'd go with the B&W because I prefer the side-latch…

view full answer...

Answer 4

The Curt Double Lock #C60712 is designed to fit various GM trucks so we need to look for a different solution for your 2023 Ram 3500. Normally the chassis version of a pickup has a bit of a different frame design so for your application I recommend…

view full answer...

Answer 5

Since your 2007 Dodge Ram 3500 is a cab and chassis model you'll need to use the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks #BWGNRK1500. There are other B&W gooseneck hitches that will fit a 3500 but those are…

view full answer...

Answer 6

We have just what you are looking for. I recommend the Curt Gooseneck Flat Plate #C65500 which can be installed on your 2021 Ram 3500 Cab and Chassis with no flatbed. This will need to get welded to the frame, and then bracing will also need to be…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...