Locking Pin Sets For Curt Pintle Hook with 2-5/16" Ball # C45908

Question

Question:

is there a locking pin set for the adjustable assembly ?

asked by: Danny

0

Expert Reply:

I have a couple options you can use to secure the Curt Pintle Hook with 2-5/16" Ball # C45908 to your receiver. First is the Curt Lock Set # C23556 which includes one hitch/receiver lock pin and the 2nd keyed alike lock for replacing one of the height adjustment pins.

We also have the InfiniteRule Locking Pins # IR57FR which includes all 3 locking pins keyed alike. These pins are stainless steel with a 42,000lb sheer rating.

expert reply by: Bud M

0

Answer 1

The Blue Ox Adjustable Ball Mount with Pintle Hook for 2-1/2" Hitch #BLU25XR and the Curt #C45908 are identical. According to Blue Ox and Curt they don't make the parts for each other so in theory it is not the exact same part, just the same…

view full answer...

Answer 2

Yes, the 2-5/16 inch hitch ball that comes included with the Curt Pintle Hook #C45908 can be swapped out with a different sized ball that features a compatible shank. For a 2 inch hitch ball to use with this assembly the Curt #C48820 will work…

view full answer...

Answer 3

Yes, if you wanted to use the Curt Pintle Hook with 2-5/16" Ball #C45908 that you referenced in the rise position you certainly could. You'd flip the hook combo as well as the shank upside down and you'd be set.

view full answer...

Answer 4

Yes, the Replacement 2" and 2-5/16" Dual-Sided Ball part #C45923 will work with the Curt Pintle Hook with 2-5/16" Ball part #C45908.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hi Steve, I totally understand, as those Pro Pride hitches are great but reaaaaaaaal expensive. So we can get you weight distribution, but due to the size your hitch and weight of your trailer, there will be a cost because there are few options and…

view full answer...

Answer 12

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Locking Pin Sets For Curt Pintle Hook with 2-5/16" Ball # C45908

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching