bing tracking image
Q & A Icon

How To Reset The Jensen JWM41 RV Stereo  

Question:

When I push the reset button, the lights come on, but go off immediately when I pull the paper clip.

0

Expert Reply:

When you reset your Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth # JWM40 you're not supposed to hold the reset button, you're only supposed to press the button and it should reset the unit, however what you can do if that's not working is, cut the power to the unit for 30 seconds and then restore the power.

This should hard reset your unit, if it does not let me know and we can continue to troubleshoot.

expert reply by:
0
Bryce D

Sue C.

4/22/2024

I tried pressing the reset button quickly which did not work. We also cut the power to the unit for 30 seconds. The unit acts like there is no power to the unit but the lights do light up when the reset button is pushed. We do have a JWM41 not JWM40

Etrailer Expert

Bryce D.

4/22/2024

@SueC It might be getting power but not enough, so I'd check to make sure it's getting the full 10 - 16v.

Sue C.

4/22/2024

@BryceD We are plugged in to full power and the radio was working until I started to set the clock, that is when the lights all went out and it became inactive.
Etrailer Expert

Bryce D.

4/22/2024

@SueC Interesting, and you've verified that you're getting power via a multimeter?

Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>