Troubleshooting Remote Not Pairing With Jensen JWM41 RV Stereo

Question

Question:

I can’t get the remote to pair with my radio. I have a JWM41, and saw that the JWM40 remote replacement would work.

asked by: Heather F

0

Expert Reply:

The Replacement Service Package for Jensen RV Stereo # JEN94FR does contain the correct remote for your Jensen RV Stereo # JWM40(JWM41). Be sure to check the IR sensors on the stereo(see image) and remote for clear line of sight, and check the battery is in working condition and inserted correctly.

expert reply by: Bud M

0

IR Remote Sensor For Jensen JWM41 RV Stereo
(click to enlarge)

Answer 1

The correct replacement remote for your Jensen RV Stereo #JWM40, is the Replacement Service Package for Jensen RV Stereo #JEN94FR.

view full answer...

Answer 2

The Replacement Service Package for Jensen RV Stereo #JEN94FR contains the replacement remote you need for your Jensen JMW41 RV Stereo #JWM40. The JMW40 and JMW41 are identical but they renamed it as the JMW41 when they moved the production…

view full answer...

Answer 3

We do indeed offer a replacement remote for your Jensen #JWM40 RV Stereo. The replacement remote controller is sold in a service pack as part #JEN94FR which also includes the wiring harness.

view full answer...

Answer 4

If the remote for your Jensen RV Stereo #JWM40 is not working, you should ensure that there are clear lines of sight between the remote and senor and that the batteries in the remote are in good working order and installed correctly. If this is the…

view full answer...

Answer 5

If the remote on your JWM41 is not working, the first thing you will want to check is the batteries in the remote. Make sure to hold the remote close to the sensor, and that there is nothing that could be potentially blocking the signal. If you are…

view full answer...

Answer 6

When you reset your Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth #JWM40 you're not supposed to hold the reset button, you're only supposed to press the button and it should reset the unit, however what you can do if…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 9

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you'd want the #GY58GR that you referenced.

view full answer...

Answer 10

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 11

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Troubleshooting Remote Not Pairing With Jensen JWM41 RV Stereo

Product Page this Question was Asked From

Continue Researching