What Lug Nut Torque Should Cooper Work Series 215/75R17.5 Radial Tire w/ 17-1/2" Wheel Use

Question

Question:

What is the torque value for the lug nuts on this Lionshead wheel?

asked by: A. L

0

Expert Reply:

The Cooper Work Series 215/75R17.5 Radial Tire w/ 17-1/2" Wheel # LH28FR would require lug nut torque figure of 130-150 ft lbs since it is a 17.5 diameter aluminum wheel with 9/16 inch diameter wheel studs.

expert reply by: Jameson C

0

Answer 1

Do you by any chance mean 235/80-16 and 235/85-16? Because there isn't a 275 trailer tire size that I have seen. If so then the widths are the same between the two 235 sizes. The difference is overall diameter. The 235/80-16 is 30.9 inches in…

view full answer...

Answer 2

When it comes to proper tire pressure for the Westlake 215/75R17.5 Radial Tire w/ 17-1/2" Wheel #LHAS701, you're going to want to always follow what's on the sidewall of the trailer for the maximum tire pressure when it's cold.…

view full answer...

Answer 3

It is possible for your 2021 Grand Design Reflection 303RLS to go from 16 inch to 17-1/2 inch wheels and tires, yes. You currently have a hub with a 6 on 5-1/2" bolt pattern, and since you mentioned replacing the suspension you would need one…

view full answer...

Answer 4

The Westlake 215/75R17.5 Radial Tire w 17-1/2" Lynx Aluminum Wheel - 8 on 6-1/2 - LR J - Black #LHAS701 is lug piloted/lug-centric. This is fairly standard and most of the wheels we carry rely on the lugs and not the hub. Typically, if they are…

view full answer...

Answer 5

In an emergency situation you'd be fine to get home with a wheel that's .2 of an inch smaller. I wouldn't recommend making any trips beyond that and long term it is your best option to go with the same size like the #A215H-8H31 for the…

view full answer...

Answer 6

The Aluminum Lynx Trailer Wheel - 17-1/2" x 6-3/4" Rim - 8 on 6-1/2 - Black #274-000006 fits this criteria and is the same wheel except for the color. This wheel is the Aluminum Sumec Lynx wheel with the black interior.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 11

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Lug Nut Torque Should Cooper Work Series 215/75R17.5 Radial Tire w/ 17-1/2" Wheel Use

Product Page this Question was Asked From

Continue Researching