How Long Does It Take to Install Dexter E-Z Flex Tandem Axle Suspension Kit

Question

Question:

i have a 2007 raptor toy hauler. i want to put in the k71653 dexter kit I can find prices on the kit.But how do find the price to install it. does it take 4 hrs 2 hrs. i live out in the country in Arizona and would like to get a price for installtion.

asked by: Hal B

0

Expert Reply:

The Dexter E-Z Flex Suspension Kit # K71-653-00 should be about a 3 hour installation for someone who knows that they're doing and has the right tools. Long for someone who is new to the task, possibly shorter for someone really familiar with this system.

Attached is a review and installation video for you to check out!

expert reply by: Jon G

0

Answer 1

Sure thing; what your tandem axle Grand Design has are Dexter E-Z Flex equalizers and you have 2-1/4" shackle straps, so what you can use is an upgrade kit from MORryde: - MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4"…

view full answer...

Answer 2

I have an attached photo which illustrates the dimensions of the E-Z Flex Heavy Duty Rubber Suspension System, part #K71-653-00 you inquired about. As you can see on the photo, the distance from the outer mounting hole on the arm of the equalizer to…

view full answer...

Answer 3

The shackle strap length of the Dexter E-Z Flex Heavy Duty Rubber Suspension System #K71-653-00 are 3-3/4 inches long and 2-1/4 inches on center. I've attached a photo to assist. The adjustment of the equalizer should allow for a great fit.

view full answer...

Answer 4

I can tell you how to determine if the Dexter E-Z Flex Suspension Kit #K71-653-00 fits your 2018 Highland Ridge Highlander, but these - and in fact all other equalizer upgrades - are not fits for any one specific trailer. To determine a fit, all you…

view full answer...

Answer 5

The equalizers in the E-Z Flex system #K71-653-00 are designed to fit in place of equalizers that measure 7-1/4 inches to 8-1/4 inches so they will still fit but might not provide as good of a ride as they possibly could if the axle spacing is in the…

view full answer...

Answer 6

I do have an option for you but there are not any Dexter E-Z Flex Suspension Kits designed specifically for an axle spacing of 36". This 36" axle spacing is common for tandem axle slipper spring systems but not double eye tandem axle leaf…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 9

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 10

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

Answer 11

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 12

For a single axle trailer, you want the shackle strap to be able to move so that you have the spring deflection needed for your suspension. Angled like the photo or even almost vertical is fine you just don't want the shackle strap to bind and…

view full answer...