Replacement Touchpad For A Lippert Level-Best System In A 2007 Itasca Sunova 35J

Question

Question:

My Kwikee Level Best model 1422192 has 4 separate plugs on the back, is there an adaptor plug required to make the LC77CJ work correctly?

asked by: Tim C

0

Expert Reply:

There is no adapter needed to connect the Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for # LC77CJ to your Lippert Level Best 1422192 leveling system on your 2007 Itasca Sunova 35J.

Attached is a product overview video for you to check out as well.

expert reply by: Bryce D

0

Answer 1

It does sound like a control board issue, however before you replace your control board I recommend inspecting your wiring as well as your ground connections. You'll want to ensure that they are in good condition (no breaks or frays) and that…

view full answer...

Answer 2

We've checked with Lippert in the past and they have told us that the Kwikee Level Best control panel can be replaced with the Lippert Control Panel part #LC77CJ.

view full answer...

Answer 3

Before you replace your unit try first, removing the screws holding your unit to your Winnebago. Then, remove the plug at the rear of the unit, wait 60 seconds, and plug back in. This will preform a reset on the unit and may solve your issue. This…

view full answer...

Answer 4

That is correct, to install the Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for Winnebago #LC77CJ, you will just need the replacement touchpad. From here, you will utilize the same mounting locations as…

view full answer...

Answer 5

Yes, the Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for Winnebago #LC77CJ will fit model 1422192 Kwikee Level Best Leveling System for Winniebago. If you have this model Level Best, then this will work for…

view full answer...

Answer 6

We've checked with Lippert in the past and they have told us that the Kwikee Level Best control panel can be replaced with the Lippert Control Panel part #LC175225 but on older models like yours which was made in 2003 you do have to also…

view full answer...

Answer 7

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 8

The Lippert Replacement Power Gear Control Board for Kwikee Level Best Hydraulic Leveling System part #LC359289 will take care of the control board. I would start here. Generally this is what has failed. To verify look for a hot spot or a flash…

view full answer...

Answer 9

Since the part number you have is 906900427 the correct part you are looking for is the Replacement Lippert Touchpad and Harness for Kwikee Level Best Hydraulic Leveling System - Winnebago #LC48UD which we have confirmed with Kwikee/Lippert.

view full answer...

Answer 10

If your current touch pad is broken, there isn't a way to just replace the button and get a working control panel, so you would need a new one. I verified with Lippert that the correct replacement for your panel with the manufacturer number…

view full answer...

Answer 11

The Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for Winnebago #LC77CJ you mentioned won't work for you because this is the standard touchpad and is missing the auto-level function that your current…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Replacement Touchpad For A Lippert Level-Best System In A 2007 Itasca Sunova 35J

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching