Is Maxxair Replacement Circuit Board Thermal Coated

Question

Question:

Is this thermal coated?

asked by: Celso S

0

Expert Reply:

Yep!

The Maxxair Printed Replacement Circuit Board # MA10A21275K does indeed come thermal coated and ready to install. This is not something you need to do yourself. I have attached a short video review that you can check out as well.

expert reply by: Chris R

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 4

The replacement printed circuit board for your MaxxFan Delux Item #MA00-07500K is Item #MA10A21275K.

view full answer...

Answer 5

The correct replacement circuit board for your MaxxFan 7000k unit is the part #MA10A21275K that you referenced. The different letter in the part number is just a slight change they made but does not affect application.

view full answer...

Answer 6

The correct replacement circuit board for your MaxxAir Deluxe 7500K vent fan assembly is indeed the #MA10A21275K you'd looked at. If you click the provided link, you can see a product description video featuring the replacement circuit board.

view full answer...

Answer 7

I'll start off by saying that typically the flashing green lights on your MaxxFan #MA00-04000K means that there is some sort of voltage issue and even though when you tested you're getting what seems to be proper voltage, I would guess there…

view full answer...

Answer 8

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 9

My contact at MaxxAir advised that there are three potential causes for the beep and no fan motion you're experiencing with your MaxxFan Trailer Roof Vent #MA00-04000K. One potential cause is that the unit was wired with incorrect polarity. Make…

view full answer...

Answer 10

That is correct, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K is the correct replacement for your MaxxFan Deluxe Roof Vent w/ 12v Fan, Thermostat, and Remote #MA00-07500K, and will work…

view full answer...