Parts Needed To Flat-Tow a 2014 Honda CR-V

Question

Question:

Looking to flat tow a 2014 Honda CR-V behind a Class A RV. What products do you recommend for this application? Looking for either a complete kit, or a parts list.

asked by: Frank B

0

Expert Reply:

In order to flat-tow a 2014 Honda CR-V you'll need a base plate kit, tow bar, safety cables, wiring harness, and braking system. There may also be a few other smaller items for convenience. I have attached a list of these for you below.

Roadmaster Direct-Connect Base Plate Kit part # RM-521567-5
Roadmaster Falcon All Terrain, Non-Binding Tow Bar part # RM-522
RoadMaster 76" Single Hook, Straight Safety Cables part # RM-645-76
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles part # RM-152-1676-7
Brake Buddy Select 3 Portable Supplemental Braking System part # HM39524

If your owner's manual says to only pull the #19 ACC radio fuse, use part # RM76511; if it states to pull the #19 ACC radio fuse and the #20 ACC key lock fuse, use part # RM76512.

expert reply by: Conner L

0

Answer 1

Yes, both the AWD and the front wheel drive models of the 2014 Honda CR-V can be flat towed. To flat tow your 2014 Honda CR-V you will need the following parts: Tow Bar and Safety Chains - etrailer SD Non-Binding Tow Bar item #e34ZR Base Plate Kit -…

view full answer...

Answer 2

I'd be more than happy to help you with parts that you need to start flat/recreational towing your 2014 Honda CR-V! I will list my recommendations for the essentials (we don't have an all-in-one kit unfortunately) and then I'll have some…

view full answer...

Answer 3

On your 2014 Honda CR-V, when your remove the key you will need to go through the entire process again. I've attached the photo of the owners manual page to assist. This will help you to circulate the fluids and allow the vehicle to be towed…

view full answer...

Answer 4

Yeah, it is definitely a bit to sort through, so I think we can help you out with the right 4-way wiring harness for your 2024 Kia Telluride. We'll start with the easy one, which is if you want to hardwire a 4-way, the model of your Telluride…

view full answer...

Answer 5

We can definitely help set you up with a tow package for your 2024 Kia Telluride. The main components you will need are a hitch, 7-way wiring harness, and a brake controller. You will need a good ball mount too, but it sounds like you have that…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

The local shop is wrong. According to the owner's manual for a 2013 Honda CR-V you can flat tow the vehicle behind a motorhome with all 4 wheels on the ground. Not only that but the manual also states that AWD models have to be towed with all…

view full answer...

Answer 8

The Roadmaster EZ5 Base Plate Kit #RM-521567-5 is confirmed to fit your 2014 Honda CR-V and your Roadmaster Blackhawk 2 tow bar. I've linked the installation video for you. The Hopkins Custom Tail Light Wiring Kit #HM56304 can be used to power…

view full answer...

Answer 9

Yes, according to the owner's manual for the 2013 Honda CR-V you start the engine before shifting through the gears. I have attached the procedure below to follow carefully to avoid transmission damage. If you shift from reverse to neutral and…

view full answer...

Answer 10

It does not mater if the trailer you are towing has LED or Incandescent lights. The Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, #HM11143274 is confirmed to fit the 2016 Honda CR-V and includes a tail light…

view full answer...