Trailer Hitch Option For A 1997 Toyota Hiace Van

Question

Question:

Hello, Im looking for a trailer hitch for my Japanese Dometic Market JDM 1997 Toyota Hiace van. Your catalog doesnt have pre-made hitch for this vehicle. Im wondering if you know of others that have fitted one of your hitches to a Toyota Hiace and which hitch they used. I think one of your universal hitches for RVs might work. Thanks for any guidance.

asked by: Randolph B

0

Expert Reply:

While we don't have a confirmed fitting hitch, we do have universal fit hitches like the Curt Adjustable Width Trailer Hitch Receiver for RVs # C13704 that you could use. This hitch fits a frame width of 22" to 66" wide and could require a bit of modification to surrounding components to complete the installation. The excess cross-tube can be cut down to make a cleaner look on your van.

expert reply by: Kevin C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 4

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 5

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 8

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 9

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 12

We have the perfect rack for carrying your e-bikes with fenders and step through frames! You will want the Thule Easy Fold XT part #TH903202. This rack will fit your 1-1/4 inch hitch, has frame clamps designed for your style of frame, is specifically…

view full answer...

Trailer Hitch Option For A 1997 Toyota Hiace Van

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching