Front and Rear Tie-Down Kits for a 2012 Ford F-350 Long Bed, Cab Running Board, and OEM Hitch

Question

Question:

Thank you for your response. I have a 8ft bed with running boards that are the length of the cab. Also the factory hitch is installed on the truck

asked by: Paul B

0

Expert Reply:

I can definitely help you out with that!

It looks like you input a 2012 Ford F-350 into our fitguide system so if you can let me know what the length of your bed is as well as if you have any boards or steps on your pickup (and their length), and what type of hitch is installed I can let you know what fits your vehicle.

expert reply by: Jon G

0

Paul B.

9/12/2022

Thank you for your response. I have a 8ft bed with running boards that are the length of the cab. Also the factory hitch is installed on the truck

Reply

Jon G.

9/12/2022

Thank you for the added info! For the front tie-downs you need the kit # TLF2016 and then for the rear you need the kit # TLF3006. It doesn't look like either of these kits are available in pieces and I know the tie-downs have different dimensions so I recommend getting brand new kits for front and back to ensure these will fit with your truck and camper. Attached are some review videos for you to check out.

Reply

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 3

I went ahead and reached out to Torklift, and they confirmed what you need to in order to remove the gas tank cover on your vehicle to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2016. The cover drops down and gives you…

view full answer...

Answer 4

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

view full answer...

Answer 5

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 6

Using an additional extender, like part #HE12, is very different than the rack, like part #K2TMC201, having a lengthy shank. The extenders like part #HE12 are usually made of two different sized pieces of steel that are welded together. The HE12 uses…

view full answer...

Answer 7

The only hitch extension we offer that is compatible with weight distribution hitches is the Titan Hitch Box Extension and Reducer #RP45292. This product is designed to fit hitches with a 2-1/2 inch receiver opening and then reduces down to a 2 inch…

view full answer...

Answer 8

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 9

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Front and Rear Tie-Down Kits for a 2012 Ford F-350 Long Bed, Cab Running Board, and OEM Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching