Trailer Brake Controller For A 2013 Volswagen Touareg

Question

Question:

I want to purchase the Redarc Tow-Pro Elite for our 2013 VW Touareg TDI with towing package. I saw the Curt custom wiring adapter. Does this eliminate the need to get additional wiring parts from Volkswagen?

asked by: Perry K

0

Expert Reply:

With the plug and play harnesses available for most controllers for your 2013 Volkswagen Touareg The Red Arc Controller # RED24FR does not have a plug and play installation for your 2013 Volkswagen Touareg.

The Red Arc Controller uses the Harness # RED69FR which plugs into the back of the controller but comes with 4 additional wires that you will have to splice into your vehicle.

A way around the non plug and play method would be to splice the Redarc harness into a plug-in harness like The Curt Harness # C51522.

Since you already have the towing package I recommend The Curt Echo Under-Dash Wireless Brake Controller # C27JR and the harness # C51522. This controller has the hidden design like the Redarc Tow-Pro, and lets you monitor and control all your braking activity directly from your phone.

The manual override button # C83HR (sold separately) will allow you to use the manual override without using the app. The app must be open and running on your phone for the button to work.

I attached a review video link below.

expert reply by: Noah E

0

Answer 1

L.1 is the lowest sensitivity that the Curt Tri-Flex part #C24VV can be adjusted down to. However, you can also adjust the overall brake output power with the output control. The output control thumbwheel can be adjusted from the lowest setting all…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 5

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 11

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 12

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Trailer Brake Controller For A 2013 Volswagen Touareg

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching