What Does Board or Step Underneath Truck Bed Mean For Camper Tie-Downs on 2005 Chevy Silverado 2500

Question

Question:

I’m looking at your frame mounted truck camper holdown for a Chevy 2005 2500. What does it mean when choosing model when asked it it has or is without a board or step under truck bed?

asked by: Allan

0

Expert Reply:

The "with/without board or step underneath truck bed" designation is referring to whether or not a step or nerf board runs underneath the truck bed. If you have these and they don't extend beyond the cab then you would choose the "without" option.

Based on what you were looking at I'll assume you have a 6-1/2 foot bed. If you don't have a board or step underneath you will need the # TLC2205A front tie-downs. If you do have a board or step you will need the # TLC4203 front tie-downs. The rear varies based on what hitch you do/don't have on your 2005 Silverado 2500.

I have attached a link below with all of our frame-mounted tie-downs for your reference. You will need to choose the correct model, bed length, and hitch to find the correct rear tie-downs for your truck.

expert reply by: Robin H

0

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 2

We offer two front-mount hitches for your 2002 Chevy Silverado 2500HD and both can be seen on the link at right. The installation instructions for both, which are also linked, indicate that in the case of both the Curt hitch #31108 and the Draw-Tite…

view full answer...

Answer 3

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 4

The front and rear Torklift tie downs you need for your 2006 Chevy Silverado 2500 short bed without steps and a factory hitch are the part numbers #TLC2205 and #TLC3205.

view full answer...

Answer 5

Yes, you are correct. For a 2007 GMC Sierra Classic 2500HD Crew Cab with 6-1/2' bed and Class V Curt Trailer Hitch Receiver, #C15302 installed, the TorkLift Custom Frame-Mounted Camper Rear Tie-Downs, #TLR3500 will fit. For front, use TorkLift…

view full answer...

Answer 6

We do carry a camper tie-down system that will work for your 2004 Chevrolet Silverado without drilling into the truck frame. I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs, for your Silverado. This system includes the front and the…

view full answer...

Answer 7

I have attached some photos showing what bolts the bottom brackets from the TorkLift Custom Frame-Mounted Camper Tie-Downs #TLC3205 will fit on compared to the photo you sent in. That upper tab with the 2 bolt holes will be on the rear-side of your…

view full answer...

Answer 8

You're looking for the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs item #AL89DQ. These springs include brackets that are custom fit for your 2024 Ford F-350. These air bags have a 7,500 lbs capacity that will level out the rear end of…

view full answer...

Answer 9

Unless you specifically need the 9 foot length provided by the part #50-97-410 harness you referenced, I would recommend the Pollak 5th Wheel / Gooseneck T-Connector, part #PK11893-11932. The Pollak harness is 7-1/2 feet long, and with a short bed…

view full answer...

What Does Board or Step Underneath Truck Bed Mean For Camper Tie-Downs on 2005 Chevy Silverado 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching