Are the Arms of the Inno Tire Hold Bike Rack INH120 Lockable

Question

Question:

I know the arms lock in place but can they be locked via key or is the cable lock the only theft deterrent security?

asked by: Chito

1

Helpful Expert Reply:

The arms of the Inno Tire Hold Bike Rack for 2 Bikes # INH120 that you referenced are not lockable with a key and the only way to lock the bikes to the rack is with the included cable lock.

expert reply by: Jameson C

1

Answer 1

Thanks so much for your purchase of the Inno Tire Hold 2 Bike Platform Rack #INH120. And that is a good question about how the rack is secured to your hitch, as it doesn't have a traditional hitch pin that goes all the way through, so I'll do…

view full answer...

Answer 2

The Inno Tire Hold Bike Rack for 2 Bikes #INH120 has locks for the rack to your hitch using the hitch lock and then to lock the bikes to the rack you'd use the included cable lock. You'd route the cable through the frames of your bikes and…

view full answer...

Answer 3

Based on similar vehicles we've tested the tilt feature of the Inno bike rack part #INH120 on it would allow the rear hatch of your 2023 Acura RDX to open the rear hatch with the rack tilted back. It would definitely be stable enough for a long…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 9

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 10

The Kuat NV 2.0 2 Bike Platform Rack, #NV22G, and the Kuat NV 2.0 Base 2-Bike Platform rack, #BA22B. are both very similar bike racks. Both racks can be expanded to a 4-bike rack, #NA22G add-on for the NV 2.0 and #BA02B for the NV 2.0 Base, and both…

view full answer...

Answer 11

I would discourage the use of an adapter for use of 2 inch accessories in 1-1/4 inch trailer hitch receivers. The reason is that the adapter places the carrier farther away from the rear of the vehicle and hitch, creating additional torque that 1-1/4…

view full answer...

Answer 12

Sorry to hear about your car accident and your hitch and bike rack being damaged. As far as installing a new hitch, the first thought that comes to mind is, because of the accident, are all the necessary attachment points for a trailer hitch on the…

view full answer...

Are the Arms of the Inno Tire Hold Bike Rack INH120 Lockable

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching