Power Gear 500210 Replacement For A Milwaukee Cylinder Board For A 1998 Chevy Southwind Storm

Question

Question:

Is this the replacement for the power gear 500210 Milwaukee cylinder board, for our 1998 Chevy Southwind Storm motorhome?

asked by: Jennifer

1

Helpful Expert Reply:

Yes, The Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System # LC82FR is the correct key pad control unit you will need per Lippert for your 1998 Chevy Southwind Storm Motorhome using the 500210 Milwaukee cylinder board.

I attached a review video link below.

expert reply by: Noah E

1

Answer 1

Are you only installing the #LC82FR (500731)? To replace your 500210 you will need the full kit #LC359259. There are also wiring changes you will have to make at the pump assembly before it will work. After speaking with Lippert it sounds like this…

view full answer...

Answer 2

I believe you meant to type that your touch pad was part number 500210 which the Replacement Key Pad Control Unit for Power Gear Powered RV Leveling System #LC82FR is a correct replacement for.

view full answer...

Answer 3

Sounds like the control panel was fried when the dealer messed up the wiring. Only solution will be an all new control panel with the part #LC359259 which we have confirmed fits the now discontinued Power Gear 500210 leveling system.

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that&#39;s going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

I reached out to my contact at Lippert and he said that both the Keypad 500456 and the 500457 module are obsolete but the Replacement Components Kit #LC359259 will work perfectly to replace both components. This will get your system back up and…

view full answer...

Answer 6

The OEM prep package consists of 4 &quot;pucks&quot; in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

view full answer...

Answer 7

I do have a solution for you, but since the Power Gear 500457 and 500456 are obsolete you will need to replace the controller and keypad. To do this you&#39;ll need the Replacement Lippert Power Gear Manual Leveling Control Kit #LC359259.…

view full answer...

Answer 8

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 9

Currently I do not see Lippert has a specific set of instructions for the Replacement Control Panel Kit with Touchpad #LC34UJ. This is not uncommon since the harness has the plug and play connections and there is no hardwiring required. Both the…

view full answer...

Answer 10

I found an old wiring diagram for your now discontinued Power Gear 500210 control panel and it really helps show how things are supposed to work. There is a red wire running to the three jacks, the dump valve, and the float valve from the solenoid.…

view full answer...

Answer 11

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Power Gear 500210 Replacement For A Milwaukee Cylinder Board For A 1998 Chevy Southwind Storm

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching