Is a Ground Plane Required for the SureCall Fusion2Go 3.0 RV Cell Phone Signal Booster

Question

Question:

We have a 25foot Escape 5th wheel fiberglass. We have no ground plane in case that is needed for the SC63MR, so would this unit work for us?

asked by: Tom E

0

Expert Reply:

I checked the installation instructions for the SureCall Fusion2Go 3.0 RV Cell Phone Signal Booster part # SC43MR and there were no ground plane requirements listed.

expert reply by: Conner L

0

Answer 1

The Rubber Ribbed Hollow Bulb Seal for RV and Trailer Doors #SR76ZR is designed exactly for this purpose so you'll be good to go with it. When you install the sides you'll want to cut a small portion of the bulb away while still…

view full answer...

Answer 2

The SureCall Fusion2Go 3.0 RV Cell Phone Signal Booster #SC43MR is compatible with all major North American carriers (Verizon, AT&T, T-Mobile, and U.S. Cellular) and with 3G, 4G LTE, and 5G connections so this booster will work with your…

view full answer...

Answer 3

Yes, the SureCall Fusion2Go 3.0 RV Cell Phone Signal Booster #SC43MR will need to be registered with your mobile provider before the first use.

view full answer...

Answer 4

The Ramp Gate Seal Kit for Enclosed Trailer Ramp #SR35FR can be installed in either location. Personally, I would keep it off the ramp door since you're more likely to damage it as you walk or move things across the ramp. Inside the frame…

view full answer...

Answer 5

Technically you can install a cover, like the Adco #AD59ZR you referenced, while your trailer is wet but that would make it much easier for mold to start growing. I would try to dry it off somehow (lots of towels or a leaf blower were suggested to…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 9

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 10

The AllTrek 4000 kits provide the best cushioning so if you were to upgrade from your CRE3000 kit to the Alltrek you would see a big improvement. If you have a 35 inch wheelbase you'd want the part #MR29DR or if you have a 33 inch wheelbase…

view full answer...

Answer 11

Yes, the DeeMaxx Disc Brake Assembly #DE89YR will fit on a 3,500lb UFP axle. You may need a different Grease Seal #168255TB depending on the age of your axle. If you have a grease seal with a 1.68" inner diameter this is the seal you will need.

view full answer...

Answer 12

The brackets on the SumoSprings Trailer Helper Springs #SS26MV are 1-1/2" wide so they will fit evenly across the humps on your spring pads. I do not recommend cutting down the spring and you will be able to use these even with only having…

view full answer...

Is a Ground Plane Required for the SureCall Fusion2Go 3.0 RV Cell Phone Signal Booster

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching