Is Curt 2 to 3 Wire Tail Light Converter Waterproof

Question

Question:

Is the curt 56196 waterproof? I wired it and mounted it on the Inside u channel of my 20 foot utility trailer. It may get rain water and road splash. Should it be sealed with flex seal or liquid wire tape?

asked by: Dave H

0

Expert Reply:

Thank you for your purchase from etrailer.com of the Curt 2 to 3 Wire Tail Light Converter # C56196, and to answer your question, no, it is not waterproof.

It is a good diea to seal the connections with Liquid Electrical Tape # SWC50122.

expert reply by: Kyle S

0

Answer 1

The Adapter 7-Pole Round Pins To 4-Pole Flat #47405 will not have the converter built in to combine your separated turn signals and stop light. That adapter will require a separate converter. For an option with the built in converter use the Pollak 7…

view full answer...

Answer 2

Taillight converters such as the Hopkins #HM48847 would be installed in a an area where the are at least semi-protected from water, so the occasional splash won't harm them but they aren't meant to be fully exposed to a downpour or submerged.…

view full answer...

Answer 3

The 7-way round connector is odd as it typically means the vehicle has the stop lights and turn signals on separate circuits which is the opposite of what trailer wiring has so you'd need to come up with an adapter since there isn't one…

view full answer...

Answer 4

I reached out to my contact at Hopkins and the Hopkins Tail Light Converter - LED Compatible #HM48847 you have should have a full 12 volts exiting the converter. She recommended checking that the ground wire is connected to clean, corrosion free…

view full answer...

Answer 5

If your trailer has separate turn signals from the brake lights and you want them to remain that way, you will need to use a special converter. On the trailer side, behind the 7-Way, you will attach the Vehicle to Vehicle Taillight Converter,…

view full answer...

Answer 6

If I understand you correct you have a trailer with separate turn signals and brake lights that aren't functioning properly because you 2013 Ford F-150's trailer wiring combines those signals on one circuit. If I'm wrong let me know. If…

view full answer...

Answer 7

Please take a look at the Curt 2 to 3 Wire Tail Light Converter, #C56196. Pair this converter with an isolating diode kit, #38955, to get the signal you are looking for. This is actually designed for use of flat towing a vehicle behind a motorhome,…

view full answer...

Answer 8

So what you need is a converter box to take your separate taillight turn signals on your vehicle and combine them so that the signals can work with your 4-way trailer wiring. For that we have the part #RM-732 that you'd wire to the vehicle wiring…

view full answer...

Answer 9

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Is Curt 2 to 3 Wire Tail Light Converter Waterproof

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching