What Is The Thread Pitch Of The Replacement Side Knob For The Dutton-Lanison StrongArm Winch?

Question

Question:

I WAS HOPING YOU CAN TELL ME WHAT THE THREAD SIZE IS IN TRAILER WINCH KNOB PART# DL94FR

asked by: Bryan J

0

Expert Reply:

I contacted Dutton-Lanison, and they mentioned that the Replacement Side Knob for Dutton-Lainson StrongArm Electric Winch # DL94FR for the Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200, and the Dutton-Lainson StrongArm Electric Trailer Winch - Marine # TW4015, has a thread pitch of 1/2-20.

expert reply by: Bryce D

0

Answer 1

I spoke with my contact at Dutton Lainson and he thought the most likely problem you are experiencing is that the clutch gear and 120 tooth gear are stuck together. He said that in high humidity situations where the winch hasn't been used in a…

view full answer...

Answer 2

It sounds like the thrust bearings may be bad on your Dutton-Lainson TW400 StrongArm Electric Winch, part #DL25200. I have attached the installation instructions and in the instructions there is an exploded view of the winch and its components. My…

view full answer...

Answer 3

Yes the Dutton-Lainson TW4000 StrongArm Electric Winch - Marine - 1,500 lbs #DL25200 you were looking at can be connected to a marine battery as long as it is a 12v battery that is rated for more than 40 amps. Keep in mind that the battery will not…

view full answer...

Answer 4

The Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 is the one I recommend for your application. It has a strong, high-impact and weather-resistant case to protect it from the elements. It also includes a brushed stainless steel front plate…

view full answer...

Answer 5

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

view full answer...

Answer 6

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

view full answer...

Answer 7

The Dutton-Lainson TW400 StrongArm Electric Winch #DL25200 is rated for use with boats up to 4000-lbs total weight. Having roller bunks provides a definite advantage over standard carpeted bunks since this trailer feature reduces friction. However,…

view full answer...

Answer 8

There is not currently a boat winch with a wireless remote we offer, though the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 you referenced comes with a handheld remote and there isn't an option for a wireless remote with this…

view full answer...

Answer 9

The Dutton-Lainson StrongArm Electric Winch w/ Remote #DL25019 has a die-formed base that allows for quick and easy mounting to a variety of surfaces. I've attached a photo to this answer that shows the holes in the base of this winch that…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

What Is The Thread Pitch Of The Replacement Side Knob For The Dutton-Lanison StrongArm Winch?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching