Handle Extensions For RV Holding Tank Waste Valves

Question

Question:

Can extensions be place on the valve handles? I need 18inch to get out of the trailer belly.

asked by: Jason L

0

Expert Reply:

Yes, we carry the Extension Rod Kit for Valterra Waste Valve # T1046-12VP, which comes with two adjustable extension rods to increase the length of your valve handle.

We also carry cable-actuated waste valves like the LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank - Spigot to Hub # 34466N4AB36GM, which can make opening your waste valves easy peasy.

expert reply by: Kevin C

0

Answer 1

You do not have to remove the valve shaft on your waste gate valve to install the extension #T1046-12VP. The instructions for this part are as follows: Unscrew the handle while holding valve shaft with cloth between a pair of pliers and the shaft.…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 4

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

The Curt A-Series line is the premium version over the Q-Series line and comes with a few differences. One major difference being the jaw design for the A-Series, which overlaps itself instead of just butting up to itself like the Q-Series does. This…

view full answer...

Answer 7

Hey Gene, we don't have that exact one you're looking for but we do have the Vitrifrigo C85i RV Mini Fridge with Built-In Freezer #VT34FR which is 3.2 cubic feet, runs off of 12V power, and does include a built in freezer.

view full answer...

Answer 8

For the Valterra #TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra #TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is 9-1/4". I have…

view full answer...

Handle Extensions For RV Holding Tank Waste Valves

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching