Recommended Steering Stabilizer For A 2019 Coachmen Pursuit Motorhome

Question

Question:

I need a steering stabilizer for my class A 2019 Coachman . Had one ordered last year but appears Roadmaster discontinued. I already have front and rear anti sway bars.

asked by: Ron K

0

Expert Reply:

As long as your 2019 Coachmen Pursuit Class A Motorhome has an F-53 Chassis you'll need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes # RM33RR.

The installation instructions aren't the best because Roadmaster still shows the older stabilizer in the instructions but it's basically the same method. Just make sure to keep your Exact Center as close to level as possible when mounting it.

expert reply by: Kevin C

0

Answer 1

The fitment of Roadmaster's steering stabilizers like the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM33RR are based on the chassis of the vehicle, along with the GVWR and some other minor…

view full answer...

Answer 2

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a…

view full answer...

Answer 3

For your 2018 Ford F-53 built on a 16k GVWR the correct Roadmaster steering stabilizer is the Exact Center #RM33RR which we have confirmed with Roadmaster.

view full answer...

Answer 4

You will get the best handling improvement in your Forest River Class A motorhome by installing aftermarket anti-sway bars and an axle stabilizer. These will do the best job of reducing the effects of wind gusts and air blasts from passing trucks and…

view full answer...

Answer 5

Your 2018 Tiffin Allegro 32SA has a GVWR of 24,000 lbs, and you can get the Exact Center stabilizer and brackets together; the correct fit for your Allegro 32SA is the following: - Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets…

view full answer...

Answer 6

We have the exact parts you need for your 2019 Winnebago 30R Intent, which was built on a Ford F-53 chassis. The steering stabilizer, rear anti-sway bar and front anti-sway bar that fit are: - Rear Anti-Sway Bar: Roadmaster Rear Anti-Sway Bar…

view full answer...

Answer 7

There is no longer a compatible replacement camera available for your older Furrion system. This particular system has been replaced and the new replacement camera #FCN48TASF is not compatible. I confirmed this with my contacts at Furrion. You'll…

view full answer...

Answer 8

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 9

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 10

The air suspension system on your 2022 Ram 2500 limits your options for suspension enhancement. None of the air bags made for your truck will be compatible. Instead, I recommend adding the SumoSprings Rebel Custom Helper Springs #SS64VR. The…

view full answer...

Answer 11

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...