Does B and W Clevis Adapter BWTS35200B Fit B and W Tow and Stow BWTS20056

Question

Question:

Is the TS35200B drawbar compatible with the TS20056 2.5inch 8.5 Pintle hitch version?

asked by: Chad H

0

Expert Reply:

Yes, the Clevis Adapter for B&W Tow & Stow 2-1/2" Ball Mounts # BWTS35200B that you referenced does fit the 2-1/2 inch hitch versions of the B and W Tow and Stow Ball Mounts like the part # BWTS20056 that you referenced.

expert reply by: Jameson C

0

Answer 1

I have another option, but since the Convert-A-Ball Interchangeable Ball Set #105TB uses a 1" diameter shank it is not compatible with the B&W Tow & Stow Pintle Hook - 2-5/16" Ball #BWTS20056. Instead if you need to…

view full answer...

Answer 2

The Ram kit is only a fit for Ram pickups but the Chevy kit is compatible with Ford, GM, and Nissan Titan gooseneck hitches. There are slight differences between the gooseneck hitch ball kits that fit the different brand trucks out there. For…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s, GMC…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

The shortest gooseneck ball we have for the 2024 Chevy puck system is the Reese Elite Series Pop-In Ball #RP23FR. This is going to be very similar to the Curt ball you mentioned. I have included some dimensions of the Reese ball below. From the top…

view full answer...

Answer 10

The one really big downside to gooseneck towing is that there isn't a great solution for short bed truck clearance unlike fifth wheel towing. With fifth wheel hitches you can use a slider hitch and have the clearance issue handled. With gooseneck…

view full answer...

Answer 11

If you take a look at the linked diagram you can see the minimum recommended clearance distances between truck and trailer for 5th wheel towing. It is recommended to have at least 5-inches from the top of the bed rails to the bottom of the trailer…

view full answer...

Answer 12

The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box part #GY58GR is primarily designed for long bed trucks. It's no different than a standard fifth wheel pin box in regards to the size. If you were using a fixed hitch and standard pin box before with…

view full answer...