Recommended Ladder Rack For A 2014 Ram 1500 With 5-1/2 Bed And BAKFlip Tonneau Cover

Question

Question:

I have a 2014 RAM crewcab with 57 bed. I do have a Bakflip cover , I want to install a tent on top on a bedrack. Which bedrack can you recommend ? Cheers ,

asked by: Jelle V

0

Expert Reply:

For your 2014 Ram 1500 with 5-1/2' bed and BAKFlip tonneau cover I recommend the TruXedo Elevate Truck Bed Rack System # TX96NV. This ladder rack is compatible with most BAK models (FiberMax, F1, G2, HD, MX4, Revolver X2, Revolver X4, and VP) and has telescoping towers that can sit at 18" or 28" to help set your tent at the right height for your needs.

The towers can easily slide in the tracks to adjust for your tent or any other items you need to haul around in the bed of your truck.

expert reply by: Kevin C

0

Answer 1

You're correct that you'll need to use a stake pocket mounted ladder rack to fit a ladder rack in with your tonneau cover, but you'll need to ensure that your tonneau cover sits inside the bedrails with very limited overlap so that the…

view full answer...

Answer 2

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 9

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Recommended Ladder Rack For A 2014 Ram 1500 With 5-1/2 Bed And BAKFlip Tonneau Cover

Product Page this Question was Asked From

Continue Researching