Can Yakima Control Tower with Landing Pad 1 Fit Yakima Roof Rack Tracks

Question

Question:

Sold my truck with Yakima tracks. Need new ones for new truck. Yakima tracks have been out of stock since last fall. Will Control towers with landing pad 1 fit on HD tracks?

asked by: Joseph S

0

Expert Reply:

The Yakima Control Towers like the part # Y8890027 (QTY 1) can fit the Yakima tracks like you mentioned with the Landing Pad 1 part # Y00221. This would work to use the Yakima Round Bars like # Y00409 which is a pair of 58 inch bars.

expert reply by: Jameson C

0

Answer 1

All you'll need to add tracks to your truck cap so you can mount a rooftop tent are the 42 inch Yakima tracks, which are the following part number: - Yakima 42" Tracks for Roof Racks #Y01126

view full answer...

Answer 2

The 63 inch Rhino Rack RTC Style Roof Rack Tracks, #RTC16, come with 8 T-bolts for each track, 16 total, and each T-bolt measures 1 inch long. Although manufacturers typically do not recommend using another company's towers on their track, I…

view full answer...

Answer 3

First of all, that's an awesome off-road trailer, thanks for the photo. As for the 60" Thule Roof Mounted Top Rack System #THTB60, it has tracks which we have measured before and found the inner track to be 0.8" wide and the…

view full answer...

Answer 4

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 5

Hey Gary, so the Yakima 54" Tracks for Roof Racks #Y26RR that you referenced are compatible with your setup as they provide the standard dimension roof tracks that your Sherpa Crows Nest was designed to fit. With that said the correct T-bolt…

view full answer...

Answer 6

To check the pins on the vehicle side 7-Way, you can use a circuit tester or the volt meter. The circuit tester will show you if a signal is coming through on the pin you are testing while the volt meter will tell you that and how much voltage is…

view full answer...

Answer 7

The Yakima Replacement Anchor Plate Style-A, Part #Y8810074, comes as a set of 8 plates that measure 3/4-inch x 7/8-inch. The centered threaded hole measures 0.2 inches (or 5.1 millimeters) in diameter. Please refer to the photo provided. The Yakima…

view full answer...

Answer 8

The correct 54" Yakima Tracks for a Camper Shell is part #Y26RR which will allow you to use any standard track mounted roof rack. The other options you listed, part #Y01127 and part #Y64MR are for metal roofs and ladder racks respectively. Since…

view full answer...

Answer 9

I can absolutely tell you the difference between Yakima OutPost HD Overland ladder rack and the Yakima OverHaul HD ladder rack, and both are indeed available with 68 inch crossbars, as well as a tonneau cover adapter with the following parts: -…

view full answer...

Answer 10

In speaking to Yakima the only knob we currently carry that will fit your TopShelf #Y94VR is in the Kit #Y38FR. This kit contains 4 knobs along with other various hardware.

view full answer...

Answer 11

It is really unusual to hear that there are water leaks when the roof rack has been properly installed on the truck. You may want to check the measurements again to make sure they are installed in the correct location on the roof of the vehicle and…

view full answer...

Can Yakima Control Tower with Landing Pad 1 Fit Yakima Roof Rack Tracks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching