Replacement Knob For Yakima TopShelf On Yakima EXO System Rack

Question

Question:

Hey there! I lost a tightening knob for my Yakima Topshelf on a recent camping trip. I’m having a hard time finding a place that sells a replacement. Yakima gave me a manufacturer SKU: 8881322 but when I looked it up they were out of stock on their website. Do you guys happen to have something similar that would work? Thank you!

asked by: Andrew

0

Expert Reply:

In speaking to Yakima the only knob we currently carry that will fit your TopShelf # Y94VR is in the Kit # Y38FR. This kit contains 4 knobs along with other various hardware.

expert reply by: Bud M

0

Answer 1

Hey there Stormy, I think we can figure this out, as there are a quite a few options. First, let's just discount the heavy-duty rack, as those are just oddly shaped crossbars and there's nothing HD about them (like you mentioned, they…

view full answer...

Answer 2

Yes, if you wanted to trim down the length of the tracks of the Rhino Rack Aero Bar Roof Rack part numbers #Y02-490B.

view full answer...

Answer 3

The track on the Rhino-Rack Aero Bar Roof Rack for Camper Shells #Y02-490B can be cut down to the size you need. But, the crossbars cannot be cut. That being said, you should not need to trim down the crossbars. It is also important to note that the…

view full answer...

Answer 4

The kit you are looking for is the Rhino-Rack Roof Rack System #Y02-480B. This rack has the 54 inch crossbars you were seeking, and is otherwise exactly the same as the kit with 59 inch crossbars you referenced, #Y02-490B. This system does have locks…

view full answer...

Answer 5

You can use the Yakima 54" Tracks for Roof Racks #Y01127 without adding anything underneath. As far as protection, there is a plastic piece that will go in between the rail and the roof, so you don't have to worry about it damaging your…

view full answer...

Answer 6

You could trim the Rhino-Rack roof rack tracks #RTC14 if you needed or wanted to. Just make sure that the cuts are perfectly straight up and down so the end caps will fit properly. Rhino-Rack does offer the tracks in other lengths. The shortest set…

view full answer...

Answer 7

The difference between the Yakima HD Crossbars like the #Y74MR and the regular Yakima Tracks like the #Y01135 is that they are compatible with different feet and adapters. With the HD tracks, they will fit the Yakima Skyline towers, OverHaul HD…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Jeff; thanks for the question and sturdy is definitely a good word for the etrailer tonneau that fits your 2022 Ram 1500 with a 5-1/2 foot bed, the etrailer Hard Tonneau Cover #e35DR. It's made of a fiberglass-reinforced plastic which is a…

view full answer...

Replacement Knob For Yakima TopShelf On Yakima EXO System Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching