How To Determine Fit of Jack-It 2 Bike Rack for A-Frame Trailers

Question

Question:

I have a Lippert Jack-it 2 bike rack, part LC429756, in my cart. I see in the NuCamp TAB forum that a space is also needed for correct install on the TAB 320 BD. I cant seem to find it on your site. Please advise.

asked by: Joseph M

0

Expert Reply:

In order for the Jack-It 2 Bike Rack for A-Frame Trailers part # LC429756 to work you'll need to ensure the outer tube of the jack is no larger than 2-1/4" diameter and there is space from the jack mounting flange to the top of the jack, the Jack-It requires nothing over 22-1/2".

I have attached a photo below.

expert reply by: Conner L

0

How To Determine Fit of Jack-It 2 Bike Rack for A-Frame Trailers
(click to enlarge)

Answer 1

The Jack-It 2 Bike Rack for A-Frame Trailers #LC429756 is considered a universal fit and there is no way for us to know if it will work specifically on any particular year, make or model of trailer but I can tell you exactly how to figure it out by…

view full answer...

Answer 2

The measurement from the bottom of the bike rack to the lift in the rack is 27-1/2". Most propane tank covers are around 19" tall so you should have enough space to remove the cover and maneuver it around the bike rack as long as the bikes…

view full answer...

Answer 3

The 1" x 9" cradle strap on your Jack-It 2 Bike Rack for A-Frame Trailers LC429756 are the longest straps offered. However, we do also offer the Replacement Straps for Cradles on Curt Standard and Premium Bike Racks #C18007, and the…

view full answer...

Answer 4

There are only certain bike racks that are rated for use on the back of an RV or trailer. You would need to contact the bike rack manufacturer to ask if your model is rated for that application. If it is not then we do have several options that will…

view full answer...

Answer 5

You can eliminate the tower to lower your Jack-it Rack #LC429756 with the BikeBase Trailer Tongue Adapter for BikeWing Carrier #LC731157. For a smaller tower you would need to reach out to the manufacturer or have one fabricated for you.

view full answer...

Answer 6

What you'll need to do is compare the dimension picture of the Lippert Jack It bike rack part #LC429756 that I attached to the area you have available between the trailer jack and the propane tanks to determine if this will fit. Most 30 lb tanks…

view full answer...

Answer 7

I attached two pictures for the Lippert Jack-It part #LC429756 that you referenced. One that shows where the jack is designed for a quick disconnect and the other that shows all of the dimensions of the rack. Hopefully that's enough info to help…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hi Bill, The Fastway e2 Weight Distribution w/ 2-Point Sway Control #FA92-00-0450 has a tongue weight range of 200lbs - 450lbs so you'd be right around the middle of the capacity when loaded, making this a great choice. This doesn't come with…

view full answer...

Answer 11

I looked up pictures of your NuCamp 320 and didn't see a back bumper on it for a bike rack or hitch to attach to so that would not seem like a promising place to mount a bike rack. I know you mentioned not wanting to mount a bike rack up front…

view full answer...

Answer 12

Because of its functionality with the Electric Ground Control TT Automatic 5-Point Travel Trailer Leveling System #LC672136 you do need to replace the 421366 tongue jack with another one. The correct part is the following: - Replacement Tongue Jack…

view full answer...

How To Determine Fit of Jack-It 2 Bike Rack for A-Frame Trailers

Continue Researching