Can I Mount a 5.30 x 12 Tire on a 12" x 4" Rim?

Question

Question:

Can I mount a 5.30x12 tire on this rim?

asked by: Ivan G

0

Expert Reply:

Yes, you can mount a 5.30x12 tire on the Dexstar Steel Mini Mod Trailer Wheel item # AM20140. This wheel has a 4 on 4 bolt pattern. If you need the more common 5 on 4-1/2 lug pattern you will want the Dexstar item # AM20151.

expert reply by: Jerred H

0

Answer 1

I would be happy to help! We do not offer the Taskmaster 5.30R12 Tires #TT53012C you were looking at mounted on a wheel that uses the 4 on 4" bolt pattern so to get this setup you would need to purchase the tire and a wheel like the #AM20140…

view full answer...

Answer 2

For any of the recommended wheels you can use valve stem #AM20903. The pilot hole on all of the wheels is 3.19 inches in diameter which is a common size. I have no doubt that the wheels will fit your hubs especially since you mentioned the…

view full answer...

Answer 3

The correct valve stem for the trailer wheel part #AM20151 that you referenced is the part #AM20904 which fits rim hole diameters of .453 inch. This will work great with the Kenda K371 Bias Trailer Tire part #AM10004 that you referenced as well.

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

By "mobile home type bolt pattern" I believe you are talking about a 5 spoke utility bolt pattern such as what is on the Dexter Trailer Hub and Drum Assembly - 6,000-lb and 7,000-lb Axles #8-174-5UC3. To measure your axle from hub face to…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Can I Mount a 5.30 x 12 Tire on a 12" x 4" Rim?

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching