Replacement Spring Lock Kit for Blue Ox 2-Point Weight Distribution Hitch Head

Question

Question:

Will this fit my BXW0800? Mine doesn’t have the screw rather it has the hammer blow rivet.

asked by: Josh

0

Expert Reply:

The spring locks for the Blue Ox weight distribution systems are the all the same but the attachment points are different. The only replacement option is the Replacement Spring Lock Kit for Blue Ox 2-Point Weight Distribution Hitch Head item # BLU26XR.

expert reply by: Jerred H

0

Answer 1

Hi Ken; I reached out to Lippert on this and they were unable to find the specific pressure from the #LC689052 testing. It is a large company and sometimes information gets lost across it with other brands like the Flow Max. I would say the pump is…

view full answer...

Answer 2

Absolutely, I am here to help! The max carrying weight of a hitch is how much the hitch can pull if you were to just hook your trailer up to the hitch and not use a weight distribution system. The Gross Trailer Weight or GTW of this hitch is 5,000…

view full answer...

Answer 3

The closest option we have to replace the problematic SL206M2 lights in your 2014 Forest River Cedar Creek Silverback 5th Wheel Trailer is the LED RV Interior Light - 9 Diodes - Surface Mount - White Housing - White #328-K-1050Q9 which are a little…

view full answer...

Answer 4

Yes, the same weight distribution hitch head is used for both the 8,000 lb. and 10,000 lb. Fastway systems. The correct head will be determined by the style of spring bar that you have. The Replacement Head for Fastway e2 Weight Distribution Systems…

view full answer...

Answer 5

The Replacement Spring Bars for Blue Ox 2-Point Weight Distribution System - 800 lbs part #BLU44XR are only sold as a pair per Blue Ox.

view full answer...

Answer 6

Blue Ox actually makes a version of their Hitch Immobilizer III that is designed for 2-1/2 inch hitches using a 2 inch hitch adapter. For that you'd want the part #BX88312 which would work well for you.

view full answer...

Answer 7

While you can still use the Blue Ox 2-Point Weight Distribution w/ Sway Control #BLU75FR without the weight distribution bars, I recommend using a lighter set of spring bars. You can use the Replacement Spring Bars #BLU94XR with a trailer that has…

view full answer...

Answer 8

It sounds like you need to replace the tab on your Blue Ox SwayPro where the spring bar inserts into the head. For this you will want the Replacement Locking Pin Kit for Blue Ox SwayPro Weight Distribution System w/ Pre-Adjusted Head #BX84-0176.

view full answer...

Answer 9

The difference between Blue Ox SwayPro heads #BXW4011 and #BXW4012 is the angle at which the trunnions are relative to the head. Head #BXW4012 is designed for underslung, also called bottom-mount, couplers so the bars are not at as a steep of an…

view full answer...

Answer 10

The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for trailers with an overslung mounted trailer coupler like part #CA-5400-B whereas the Replacement Head for Blue Ox SwayPro Weight Distribution Systems part…

view full answer...

Answer 11

The maximum amount of drop for the 6-hole shank is 1-1/2 inches for the Blue Ox system you asked about: - Blue Ox 2-Point Weight Distribution with Sway Control #BLU75FR This system fits 2 inch receivers and is designed for total tongue weights…

view full answer...

Replacement Spring Lock Kit for Blue Ox 2-Point Weight Distribution Hitch Head

Product Page this Question was Asked From

Continue Researching