Recommended Low-Profile RV Roof Vent For A Trailer

Question

Question:

Hello. I am looking for your lowest profile 14x14 ceiling vent with a 12v fan for a camping trailer. Are you able to point out which product extends the least amount above the roofline? Thank you!

asked by: Mike P

1

Helpful Expert Reply:

The MaxxFan Mini Plus Manual RV Roof Vent w/ 12V Fan # MA00-03851 or # MA00-03801 for white is going to sit the lowest to your trailer's roof at 4-1/8" in height when installed. These vents come with a Rain Shield cover which will allow you to use them no matter the weather and also while driving, unlike other models.

The LED light ring gives you a convenient night light or accent light as well. I've attached a video below where I'll walk you through the installation process of these vents.

expert reply by: Kevin C

1

Answer 1

As long as you can space the load bars of your Yakima ladder rack more than 24 inches the Thule Tepui Foothill Rooftop Tent #TH37HJ would fit and work well. The footprint of the tent is 84" long x 47" wide x 40" tall which I believe…

view full answer...

Answer 2

Depending on how you mount the battery inside the tongue mounted tool box like #3371701680, you may or may not need longer battery cables. Since your battery is already mounted in this location, you most likely just need to drill holes and reconnect…

view full answer...

Answer 3

view full answer...

Answer 4

We do indeed offer some hitches that are designed to bolt to the frame of your travel trailer. If the frame members on your travel trailer are between 18-51 inches apart, the Curt Hitch #C13701 would be an excellent choice, with it's tongue…

view full answer...

Answer 5

The 220 lb weight capacity of the Thule SquareBar Crossbars #TH712500 that you referenced is the weight of the crossbars combined. Be sure not to exceed the weight capacity on the roof of your vehicle as well.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Recommended Low-Profile RV Roof Vent For A Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching