Recommended Front Mount Hitch For A 2022 Ford F-150

Question

Question:

I need a front mount hitch for a 2022 F-150.

asked by: Derek B

0

Expert Reply:

We have what you need with the Draw-Tite Front Mount hitch, # 65067. This has a line pull of 9,000 lbs. for use with a wench and a vertical load limit of a full 500 lbs.

Please note the product review and installation video on a 2018 model.

expert reply by: Michael R

0

Answer 1

The Draw Tite Front Hitch part #65067 does fit with the auto deploying air dam of your 2021 Ford F-150.

view full answer...

Answer 2

The Draw-Tite Front Mount Trailer Hitch Receiver #65067 will actually work with the auto deploying air dam on your 2022 Ford F-150, although there is some trimming of the air dam and the reinforcement bracket to get it installed (see attached photo…

view full answer...

Answer 3

The front mount trailer hitch receiver with the best ground clearance once installed on your 2021 Ford F-150 is the Draw-Tite #65067 in which the bottom of the receiver sits just above the bottom of your air dam so you will not lose any ground…

view full answer...

Answer 4

The Draw-Tite Front Mount Trailer Hitch Receiver part #65067 which is a fit for a 2021 Ford F-150 is NOT compatible on models with the auto deploying air dam per Draw-Tite. It doesn't look like there is an option for models with this feature…

view full answer...

Answer 5

I suggest the Draw-Tite Front Mount hitch, #65067 that installs through a cut out in the plastic air dam of the F-150. The hitch does not sit lower than the lowest part of the truck so it does not reduce ground clearance. Trimming the lower air dam…

view full answer...

Answer 6

Unless your 2021 Ford F-150 has the auto-deploying front air dam, the Curt #C31083 front mounted receiver would be a fit.

view full answer...

Answer 7

We do have a front-mounted trailer hitch for your 2021 Ford F-150, and it will fit so long as your truck does not have the automatically deploying air dam. The correct part is the following, from Curt: - Curt Front Mount Trailer Hitch Receiver…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

view full answer...

Answer 10

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Recommended Front Mount Hitch For A 2022 Ford F-150

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching