Lippert Road Armor Fitment With a 2021 Forest River Vengeance Rogue 25V Travel Trailer

Question

Question:

Hello, I measured the stock equalizers on my Vengeance Rogue 25V. Theyre 5 3/4inch across which I saw questions indicated is fine with the 6inch width dimension, but the height from the center hole to the equalizer holes is probably 2inch vs the 3 1/2inch in the diagram. The existing shackle plates are 2 1/4. Would longer shackle plates be all I need or will these equalizers not work for me? Thanks.

asked by: Jeff S

1

Helpful Expert Reply:

The Lippert AP Kit - Tandem Axle Road Armor Wet Bolts and Shackles # LC52SV does include the longer 3-1/8" hole center to hole center shackles you will need. These longer shackles help to compensate for the height difference of the Road Armor Shock Absorbing Equalizer Kit # LC696740 versus the stock 2-1/4" shackles on your 2021 Forest River Vengeance Rogue 25V travel trailer.

The Bronze Bushings # K71-291-00 may be needed if your current leaf springs have nylon bushings. You will need 2 of these kits for a 4 of your leaf springs.

I recommend using the LubriMatic LMX Industrial Strength Grease # L11390 with the Grease Gun # L30416. This grease is specifically formulated to work well in hot and cold climates under extreme pressures.

expert reply by: Bud M

1

Answer 1

You currently have the Equa-Flex Cushioned Equalizers #LC279687 used with your Lippert axles. We do have the MORryde Rubber Equalizers #MR87ZR that you can use to replace your current equalizers. These have 3" of travel and are rated for axles…

view full answer...

Answer 2

Yes, the Equa-Flex Cushioned Equalizers part #LC314336 will work with the MORryde Wet Bolt Kit LRE12-001. I took a look at the MORryde Wet Bolt Kit and was able to confirm that it uses 9/16" x 3-1/2" bolts which is what you need for the…

view full answer...

Answer 3

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 4

In regards to the Road Armor Shock Absorbing Equalizer Kits like part #LC696740, the only difference between the blue powder coated option and yellow powder coated option is that yellow denotes aftermarket and blue denotes factory. In other words, if…

view full answer...

Answer 5

You will definitely want to go with the Road Armor Shock Absorbing Equalizer Kit #LC696740 over the MORryde as the Road Armor has more travel and will provide a smoother ride. Then, in regards to shackle straps I'm not sure what you mean by which…

view full answer...

Answer 6

Yes, the MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps #MR76ZR will fit with the Equa-Flex system on your Grand Design.

view full answer...

Answer 7

Hey Mike, To determine if the MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR would be a compatible fit you'll first want to measure the bolt hole spacing on your current equalizers. The #MR87ZR has a 6-1/2" center to center…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 10

The length Dexter posts for their leaf springs is the flattened length, so with the 072-042 having a length of 26" you would want to compare that to our 25-1/4" long springs as we measure their length with the spring relaxed. The 3-Leaf…

view full answer...

Answer 11

Hey Tom, I can definitely provide measurements and dimensions for the Equa-Flex Cushioned Equalizer #LC279687 and I have attached those dimensions below. Unfortunately, there is no database that we can reference that will tell us exactly what size…

view full answer...

Answer 12

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Lippert Road Armor Fitment With a 2021 Forest River Vengeance Rogue 25V Travel Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching