Can The LED Lights For Furrion Air Distribution Boxes Be Purchased Separately

Question

Question:

I appreciate your help on the 12V question. Is it possible to purchase the LED lights that go into the distribution box? My controller is wired for it and my Furrion wall mount thermostat has a light button on it. Thanks in advance.

asked by: John R

0

Expert Reply:

The LED lights don't come separate so you would need to purchase the Replacement Air Distribution Box w/ LEDs for Furrion Chill RV Air Conditioner # FACT12LA-PS to swap out your current air distribution box with to be able to utilize the LED light function.

expert reply by: Kevin C

0

Answer 1

The Furrion Chill Replacement RV Air Conditioner #FR58PR that you referenced does not come with an air distribution panel. If you were wanting the panel you mentioned that has the LED lighting you would need to also go with the #FACT12LA-PS.

view full answer...

Answer 2

The Furrion Single Zone Controller included with the #FR65PV you were looking at will work with the Replacement Air Distribution Box w/ LEDs for Furrion Chill RV Air Conditioner - Electric Control #FACT12LA-PS and has all of the required wiring to…

view full answer...

Answer 3

We've checked with Furrion in the past and your current Furrion basic thermostat can be replaced with the Premium wall thermostat part #FR33PR and you'll have all of the functions you are wanting without having to change anything else.

view full answer...

Answer 4

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 5

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 6

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 7

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...