Replacement Screen For The Furrion Vision S Wireless RV Backup Camera System # FOS07TASF

Question

Question:

Is this the correct replacement for part number FOS07TASF from the back of my current screen?

asked by: Matthew H

1

Helpful Expert Reply:

When it comes to replacing the monitor on The The Furrion Vision S Wireless RV Backup Camera System FOS07TASF, what you need is the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System # FR47FR.

expert reply by: Noah E

1

Answer 1

No, it does not. All of the Furrion replacement cameras like the 7" item #FR47FR do not include them. This is a Furrion decision and the power cord you need, item #C-FOS07TAPK-006 is sold separately.

view full answer...

Answer 2

Here is the 7 inch Replacement Monitor for your Furrion Vision S Wireless RV Camera System #FR47FR and the best way to secure this in my opinion would be to get the suction cup mount #FR79SR. This can be placed anywhere on a smooth even surface. I…

view full answer...

Answer 3

To my understanding the Furrion backup camera system has had a few different makes but for the current version, the Vision S that uses 7" monitor #FR47FR, only the Suction Cup Mount #FR79SR is compatible. An older version may have used a…

view full answer...

Answer 4

Since your 2022 KZ Durango D311BHD has a 13k GVWR and has a Lippert 1116 style pin box on it currently the correct MORryde Cushioned Pin Box fit would be the #MR77VR which is correct fit and weight capacity. This will fit great and will do a great…

view full answer...

Answer 5

If you have the Furrion Vision S camera system then the correct replacement 7" monitor is part #FR47FR on our site. I believe those part numbers you found have to do with different camera kit options that monitor can come with. Attached is…

view full answer...

Answer 6

I do have a solution for you, but the only power cord available for the Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System #FR47FR is the Replacement Furrion Monitor Power Cable #C-FOS07TAPK-006. There is not a USB…

view full answer...

Answer 7

The Furrion Vision S Wireless RV Backup Camera w/ Night Vision #FCN48TASF is compatible with the following monitors: -Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System #FR77FR (Different part numbers are 2021124097,…

view full answer...

Answer 8

Yes you can upgrade the 5 inch monitor of your Furrion Vision S system with a 7 inch one with the part #FR47FR and you'd be set.

view full answer...

Answer 9

I went out to the warehouse and measured the ball size of the Replacement Suction Cup Mount for Furrion Vision S Wireless RV Backup Camera or Observation System part #FR79SR for the 5" and 7" screens and it measures .85".

view full answer...

Answer 10

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 11

Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…

view full answer...

Answer 12

The #FRCBRKT-BL is actually the mounting bracket but it will still be the Furrion Vision S Wireless RV Backup Camera #FCN48TASF mounted on your bracket. Your camera is compatible with the Replacement 4.3" Monitor for Furrion Vision S Wireless RV…

view full answer...