How To Find Correct Braking Assemblies for 1996 Load Rite 21T Trailer
Question:
Hi, Trying to replace drums on my 1996 load rite 21T 4200 not sure of proper replacement. Thanks for your help Bruce
asked by: Bruce U
Expert Reply:
The easiest way to find the correct replacement braking assemblies for a trailer will be by using the axle capacity which is typically printed onto a tag in the center of the beam. If one is not present you can measure the inside of the drum and count the mounting flange bolts. You'll also need to determine if you have electric or hydraulic and whether they are drum or disc.
I have attached our entire trailer brake assembly selection below for you to choose from once you get the above info but we unfortunately cannot say for sure which brakes are on any given trailer.
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Hydraulic Drum Brakes for Dico 15638
- Article: Trailer Wiring Diagrams
- Q&A: Difference Between Kodiak 3,500 lb Hub & Rotor Disc Brakes
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Comparing Uni-Servo and Free Backing Hydraulic Drum Trailer Brakes
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub