Will High-Rise Pop-In Ball 2020 Fit 2020 GMC Sierra 3500 With OEM Puck System

Question

Question:

Verifying that this ball will work with my 2020 Denali 3500 with the OE puck system. I need the extra inch clearance to tow my 5th wheel as I have just switched to a gooseneck hitch from the traditional king pin. Thanks

asked by: Robert F

0

Expert Reply:

Yes, the High-Rise Pop-In Ball for Reese Elite Series Underbed Gooseneck Hitch - 1" Rise - 2-5/16" # RP19315 will fit your 2020 Sierra 3500 Denali. This will add an additional 1" of height and comes with a limited 7-year warranty.

expert reply by: Robin H

0

Answer 1

The OEM Prep Package on your 2022 GMC Sierra 2500HD will appear as 5 holes in the bed. Four going around in a rectangle with one in the middle (see the included picture). If you have this in your bed, you do have the prep package and actually already…

view full answer...

Answer 2

There are two options you can use for a bit of added height when using your B&W Turnoverball Underbed Gooseneck Hitch #BWGNRK1016. You can get an extra 1" by using the High-Rise Ball for B&W Turnoverball #BWGNXA2050. You can also use the…

view full answer...

Answer 3

From the pictures that you sent in it looks like you either have the Curt Double Lock #C607-604 or the Curt EZr Double Lock #C611-624 installed on your 2016 GMC Sierra Denali 3500. If you have the Double Lock #C607-604 then you can use the X5 Adapter…

view full answer...

Answer 4

For covering the pucks of your 2019 GMC Sierra 3500 you can use the covers part #58199.

view full answer...

Answer 5

When installing a gooseneck hitch on your 2020 GMC Sierra 3500 long bed, such as the B&W Turnoverball #BWGNRK1020 (which would be an excellent choice), you will want to position the hitch ball as stated in the installation manual. You should not…

view full answer...

Answer 6

Between the Curt #C60692 and B&W #BWGNXA2061 that will fit your 2022 GMC Sierra 3500 with the factory pucks/prep package, I do prefer the B&W. Though both the Curt and B&W are rated up to 30,000 pounds and will fit your truck perfectly,…

view full answer...

Answer 7

I went out to the warehouse and found that the height of the hitch ball in the B&W Ball and Safety Chain Kit #BWGNXA2061 for your 2018 GMC Sierra 3500 measured 5-3/4" from the bottom of the platform to the top of the hitch ball. I have…

view full answer...

Answer 8

Yes, the Offset Gooseneck Hitch Ball part #19308 that you referenced is compatible with the Remov-A-Ball Gooseneck hitches like part #9460.

view full answer...

Answer 9

The Hide-A-Goose gooseneck hitch ball with 5 inch offset, item #19308, is meant to take the place of the standard ball. You can definitely drive/tow with it in place of your standard gooseneck ball.

view full answer...

Answer 10

The receiver or bottom portion on the Gooseneck Hitch Ball with 2-5/16 inch Diameter and 5 inch Offset, part #19308 is round. This Gooseneck ball is model specific, it will only work with the #9460, #9461, #9462, #9463, #9464, #9470, #9471 and #9474…

view full answer...

Answer 11

Yes the Bolt hitch lock part #BL7023585 does fit your 2020 Ford F-350. If you are unsure then you can check the attached picture that shows all of the key styles it fits.

view full answer...

Answer 12

We do have a BOLT hitch receiver lock that will work with the key to your 2020 Ford F-350. I confirmed with BOLT that the correct part is: - BOLT Trailer Hitch Receiver Lock for 2" and 2-1/2" Hitches - Codes to Ford Side-Cut Key #BL7023585…

view full answer...