Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In Hybrid

Question

Question:

Have 2022 Ioniq Plugin Hybrid, looking for hitch and bike rack. Nothing is compatible?

asked by: Jethro H

0

Expert Reply:

While we do have a bike rack option for you, we currently do not have any hitches that we well that can allow you to mount a rack for your plug-in Hybrid 2022 Hyundai Ioniq. This is because since your model is a new model, manufacturers have not engineered a model that fits the exact design of your vehicle quite yet.

With that being said, I recommend using a trunk bike rack like the Yakima FullBack 2 # Y02634 or the FullBack 3 # Y02633. Not only does the FullBack include a 35-pound per bike weight capacity, it also comes with integrated locks that protect the rack and the bikes themselves from theft.

However, it is important to note that the FullBack is only an option if you plan to take your bikes short distances. This is because, since the installation requires you to put the top and bottom straps in anchor mode, this can potentially damage the headliner or trunk liner of your Ioniq.

If you plan to take your bikes on a longer journey, I recommend using a roof-mounted system. I recommend the following setup:

- Yakima JetStream Crossbars - 60" # Y00426
- BaseLine Towers for Yakima Crossbars - Naked Roofs # Y28TR
- BaseClip Fit Kit - Qty. 2 # Y06175
- BaseClip Fit Kit - Qty. 2 # Y06111

With this particular system, you will be able to mount a roof rack bike rack. I recommend the Yakima FrontLoader # Y02103 because of its wheel-mount style. With this mounting style, you do not need to worry about the frustrating mounting process of a fork-mounted rack. Since the FrontLoader only measures only 9-1/4" wide, you can mount more than one FrontLoader to the crossbars.

I went ahead and attached some demo videos for you to check out.

expert reply by: Bob C

0

Answer 1

For the Saris Bones 2 #SA805BL and Bones 3 #SA801BL, there is not a similar Fit Dial setting like the one on the Thule RaceWay Pro. The pivot points of the rack are simply for adjusting the angle of the rack instead of the tightness. For adjusting…

view full answer...

Answer 2

What you are wanting to do is somewhat possible but it's not a question we get very frequently so that would be why it would be hard for you to find info on. It is hard for me to say for sure that what you are wanting to do since there are…

view full answer...

Answer 3

It depends on how much free crossbar space there is on your Subaru XV Crosstrek once you have the kayak mounted on the Hull-a-Port. You can determine this by placing the kayak carrier on the roof then measuring from the back of the kayak carrier…

view full answer...

Answer 4

You could use the Saris Bones Trunk Rack part #SA805BL with a women's bike that has a carbon frame but you are going to need to use a bike frame adapter bar like part #UB01 so that the rack won't touch the delicate carbon frame and also to…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The replacement anti-sway cradle part #TH8523486001 that you referenced would be an exact replacement for the anti-sway cradle you have on your bike rack currently. It would not be an upgrade. Basically this lines up with the vertical portion of the…

view full answer...

Answer 7

I spoke with my contact at Saris and he confirmed that for your 2016 Mazda CX-5, the proper mounting location of the lower feet on the Saris Bones 3 Bike Carrier #SA801BL is in the rear license plate well. I have attached an image with a different…

view full answer...

Answer 8

I checked with my contact at Saris and the Bones trunk mount bike is a fit for your 2013 Nissan Sentra with low profile spoiler. Take a look at the video of this bike rack installed on a 2014 Chevy Cruze and you can see how it is installed on a flat…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Options to Transport Bikes on My 2022 Hyundai Ionic Plug-In Hybrid

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching