Replacement Linkage Arm For Kwikee 38 Series RV Steps On A 1999 Monaco Diplomat Class A Motorhome

Question

Question:

Hello, I have a Kwikee series 38 on my 1999 monaco diplomat and the inch arm inch that connects the motor to the step has broken. Can I purchase the arm only? Or do I need the gearbox as well? Thank you,

asked by: Francois

0

Expert Reply:

The linkage arm only comes with the gearbox so you would need to purchase the whole assembly # LC379160 to replace the broken linkage arm on your Kwikee 38 Series RV steps on your 1999 Monaco Diplomat Class A Motorhome.

expert reply by: Kevin C

0

Borken Linkage Arm
(click to enlarge)

Answer 1

We have the exact replacement you need for motor 1101422 on your 2015 Forest River Berkshire motorhome, which is the following: - Replacement Motor for Kwikee Electric RV Steps #LC379147 If you need to replace the gear box as well, that part is the…

view full answer...

Answer 2

We do carry the correct replacement for the worn out 1101422 / 214-1001 motor on your Kwikee electric steps, with the correct part being the following: - Replacement Motor for Kwikee Electric RV Steps #LC379147 These will work perfectly for you as…

view full answer...

Answer 3

For replacement gear box linkage for the existing Kwikee steps on your motorhome, I recommend the Lippert Kwikee Step Gear/Linkage #LC379160. This is specifically designed for certain electric steps in the Kwikee series including your Series #32…

view full answer...

Answer 4

We have exactly what you are looking for! The correct replacement step motor for the Kwikee 32 Series double step with step motor number 5973820 on your 1999 Holiday Rambler motorhome is the Replacement Motor with Mounting Plate for Kwikee Electric…

view full answer...

Answer 5

Normally if the Kwikee steps are having a hard time fully extending or retracting and there's a jerking motion at the same time that would indicate that there's a gear, gear box or linkage problem. Dry grease would not typically cause…

view full answer...

Answer 6

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is…

view full answer...

Answer 7

If you just need the gearbox, the linkage will have an A, B, or C. Once you know which one you have, then you will need one of the following: Lippert Components Kwikee Step Gear/Linkage with A #LC379160 Lippert Components Kwikee Step Gear/Linkage…

view full answer...

Answer 8

With the replacement tray for your older Thule Doubletrack you'd need the barrel nut part #853-0446 and the carriage bolt that is M6 X 60mm. While these are not available, I believe you could make the M6 X 65 mm carriage bolt by Thule work…

view full answer...

Answer 9

Thanks for getting me the pictures of your Thule T2! From that I can tell you have the T2 Classic like #TH9044 and the correct wheel holder would be the part #7521568001. This would also work on the #TH9044-TH9046.

view full answer...

Answer 10

The rear wheel tray of your Thule T2 Pro XTR part #TH83JV for 2-bikes or #TH69JV for 4-bikes is designed to easily slide back and forth to accommodate varying wheelbases like what you have. It's really just a matter of grabbing the tray and then…

view full answer...

Answer 11

What bike rack do you have? That's the best and easiest way to pick out replacement wheel holder assemblies.

view full answer...

Answer 12

The rails that the rear wheel holders fit on is different between the Thule T2 Pro and the T2 916XTR so #7521682001 is not a fit for the 916XTR. Instead you can use #7521568001 which does fit. The strap and buckle are included so it will fix your…

view full answer...