Recommended Anti-Sway Bar for 2022 Ford E450 Series with V8 Engine  

The sway issues you are experiencing have little to do with the tires because the sway you feel is movement of the frame. I recommend you use the Roadmaster Rear Anti-Sway #RM-1139-147 and the Front Anti-Sway #RM-1139-176. These bars will stabilize…

Thanks for reaching back out and pointing out the video you found that in! I checked out the video you referenced about the Roadmaster Rear Anti-Sway Bar #RM-1139-147 install on a 2019 Ford E-Series Cutaway (see linked) and while Ryan did ultimately…

The reason there is drilling required to install the Roadmaster Rear Anti-Sway Bar #RM-1139-147 on your 2004 Ford Super Duty Class C motorhome is because the end links mount in a different location on the Roadmaster unit than the OEM unit. Check out…

We have exactly what you need to stabilize your Ford E-450 and drastically improve your comfort on the road. For the front anti-sway bar you will need the Roadmaster #RM-1139-176 and for the rear you will use part #RM-1139-199. Then for the steering…

The correct Roadmaster Reflex Steering Stabilizer with Mounting Brackets for your 2008 Ford E-350 is part #RM-RBK24-RSSC if you have the V10 engine or part #RM-RBK2-RSSC if you have the V8 engine. The only difference between the red and blue model is…

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

First, I truly appreciate your thoughtful question and all the information you provided; that is really helpful to try and get you the best solution. So let's get into the sway bars, and your research was on point, they are absolutely the best…

The Roadmaster Exact Center Steering Stabilizer with Mounting Brackets #RM47MR is the correct steering stabilizer for your 2021 Entegra Odyssey 24B on the 2021 Ford E-450 chassis. This will replace the existing steering stabilizer and brackets that…

Which model of your 2004 Coachmen Freelander Motorhome do you have? Or if you can get me the GVWR and the chassis type (Ford E-450 most likely) I can get you some recommendations.

When installing the end link kit part #RO57FR you do sometimes need to use a 1/2 inch drill bit to enlarge the holes on the sway bar. You do need to make sure you are using a drill bit designed for metal and not softer materials as they won't…

Both the front sway bars you mentioned are a fit for your 2016 Ford E-450 with a V10 engine, the part #RM-1139-176 and #BXTH7718. Both of them replace your factory sway bar and are 1-3/8 inch in diameter so they would perform the exact same. Since…

The correct Roadmaster steering stabilizer for your 2011 Itasca Cambria built on an E-450 chassis is the Exact Center part #RM47MR. The Roadmaster steering stabilizers are widely considered to be the best performing stabilizers for RVs like yours but…